
The AirTAC GAC F.R.L. Unit GAC300C15SWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in ported body operates at 0.15-0.9 MPa (20-130 psi) and uses a 5 um element to capture fine particles before they reach precision valves. A circular gauge is fitted, reading MPa/psi for the default NPT thread, allowing operators to monitor the set downstream pressure directly.
The internal build sequence passes air through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. Weighing 1300 g, the assembly features a robust metal bowl and carries a 60 cc condensate bowl alongside a 98 cc oil reservoir. Replacement spares follow the body and port suffix exactly, utilizing GAF300-15, GAR300-15 and GAL300-15 units when service is required. Order code GAC300C15SWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C15SWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Prepares air for high-precision CNC tooling changers where the 5 um element protects delicate actuators from fine particulate ingress.
Regulates and lubricates air for continuous motion packaging lines, ensuring consistent cylinder stroke speeds through long production runs.
Conditions the main air supply feeding a localized assembly station manifold, using the 1/2in port to handle moderate flow demands.
Choose this metal bowl configuration for environments where PC or nylon might be unsuitable, keeping in mind the 1.0 MPa maximum pressure and -5 to 70 C temperature limits apply equally across all bowl materials. The 5 um element provides finer filtration than the standard 40 um option, trading off element service frequency for enhanced protection of downstream instrumentation. The drain position is blank, meaning both a semi-auto and a manual drain are fitted to clear the 60 cc condensate bowl. If the downstream line must remain oil-free, omit the lubricator and select a filter-regulator instead. Stepping up to the GAC400 body increases the plotted flow envelope from 3000 L/min to 6000 L/min at 0.7 MPa inlet, roughly doubling the sizing capacity. Keep in mind the 1.5x overpressure margin, as the 1.5 MPa proof pressure against the 1.0 MPa maximum is a burst-test boundary rather than permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This unit operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It functions in temperatures from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl with a 98 cc oil bowl. The recommended lubricant is ISO VG 32 or equivalent.
The 5 um element traps far finer particles than the standard 40 um filter, making it ideal for sensitive pneumatic instruments, though it requires more frequent element service. The metal bowl provides a robust housing option while retaining the same 1.0 MPa pressure limit, with spares available as GAF300-15, GAR300-15 and GAL300-15.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.