
The AirTAC GAC F.R.L. Unit GAC300C15SWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. It features a 1/2in port, a 5 um element for trapping fine particles, and a standard pressure range of 0.15-0.9 MPa (20-130 psi). The metal bowl equips this assembly for rugged industrial environments.
Air passes through the filter first, then the regulator, before oil mist is introduced downstream by the lubricator so the regulator seat stays clean. The 60 cc condensate bowl and 98 cc oil reservoir dictate the maintenance interval for this 1300 g assembly. A circular gauge reading MPa/psi is fitted for the default NPT thread, and the reverse-flow (reflux) valve is included as a distinct pneumatic symbol. Order code GAC300C15SWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C15SWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Supplies finely filtered 5 um air to precision pneumatic tooling changers on CNC machining centers.
Conditions air for continuous motion packaging equipment where consistent pressure is essential.
Feeds pilot valves on automated stamping presses, adding necessary oil mist for moving parts.
Choose this GAC300 model for mid-size duties requiring fine 5 um filtration, stepping up from the GAC200 which plots to just 1750 L/min at 0.7 MPa inlet versus this body's 3000 L/min envelope. The metal bowl suits harsher settings where a standard PC bowl might risk impact damage. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. The semi-auto and manual drain pair both ship fitted, while replacement spares follow the GAF300-15, GAR300-15 and GAL300-15 codes. Because the 1.5 MPa proof pressure is a 1.5x burst-test margin against the 1.0 MPa maximum, it is never permission to operate above that 1.0 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, uses a 60 cc drain bowl and a 98 cc oil bowl, weighs 1300 g, and requires ISO VG 32 lubricant.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue shows this as a separate pneumatic symbol with details on its own page, and it does not alter the standard 5 um filtration or 1/2in port sizing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.