verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC300 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC300N15ALNTK

The AirTAC GAC F.R.L. Unit GAC300N15ALNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size1/2"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialNylon
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight1300 g
$107.08 $114.58Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC300-15 bowl, type and element option on one page All GAC300-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC300N15ALNTK

Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/2in ported body operates at the lower pressure range of 0.15-0.4 MPa (20-58 psi) and uses a 40 um element. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling.

This specific configuration uses a nylon bowl and an automatic drain to clear condensate without an operator. No pressure gauge is supplied, but a 1/8in connection is available if you need to add one. The assembly includes a reverse-flow (reflux) valve, shown as a separate pneumatic symbol in the catalogue, and weighs 1300 g. Order code GAC300N15ALNTK has NPT ports (the T in the code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC300N15ALNTK Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC300N15ALNTK
SeriesGAC300 F.R.L. combination
Port size1/2" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialNylon
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
Capacity of oil bowl98 cc
Recommended lubricantISO VG 32 or equivalent
Weight1300 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.

Model Code: Airtac GAC F.R.L. Unit GAC300N15ALNTK

GAC300GA300 series F.R.L. unit — sets ports, bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
15Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/8" gauge connection.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC300 · 1/2" · curve to 3000 L/min
One size downGAC200
One size upGAC400 (curve to 6000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC300N15ALNTK Is Used

handyman

Low-Force Assembly Jigs

Feeds soft-grip actuators on light assembly lines where output must stay below 0.4 MPa to prevent part deformation.

package_2

Bagging Machines

Conditions air for delicate film-handling cylinders, adding oil mist downstream of the regulator to protect moving seals.

science

Laboratory Automation

Prepares supply for low-pressure test fixtures, relying on the automatic drain to clear condensate during unattended overnight runs.

Is the Airtac GAC F.R.L. Unit GAC300N15ALNTK the Right Air-Prep Unit?

Choose this lower-pressure type for machines needing a maximum 0.4 MPa output; if the application might ever exceed that, select a standard type instead. The 60 cc drain and 98 cc oil bowls set the maintenance interval, while the nylon bowl suits environments where material compatibility is preferred over the standard PC. Since no gauge is included, the set pressure cannot be read without adding one to the 1/8in port. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator. Replacement parts share the 300-15 suffix: GAF300-15, GAR300-15 and GAL300-15. Keep in mind the 0.4 MPa ceiling is 44% of the standard 0.9 MPa maximum.

Quick checklist

  • ✓ Body size for your peak flow (1/2" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 1300 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC300N15ALNTK FAQ

This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl with a 98 cc oil bowl. The recommended lubricant is ISO VG 32.

The N in the ordering code indicates no gauge is supplied from the factory. You can install your own circular gauge using the 1/8in connection on the body, allowing you to match the exact scale your operators prefer for monitoring the 0.15-0.4 MPa range.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC300N15ALNTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC300N15ALNTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.