
The AirTAC GAC F.R.L. Unit GAC300N15ALNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/2in ported body carries a 5 um element for precision valve protection and operates at 0.15-0.4 MPa (20-58 psi). Because the lubricator sits last in the sequence, oil mist is added downstream of the regulator seat, preventing fouling.
The nylon bowl holds 60 cc of condensate and 98 cc of oil, while the automatic drain clears liquid without an operator. No gauge is supplied, but a 1/8in connection is ready if you need to add one. Spares are GAF300-15, GAR300-15 and GAL300-15. Order code GAC300N15ALNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N15ALNWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air to sensitive lab dosing pumps and analytical instruments requiring fine 5 um filtration.
Conditions air for delicate film-handling actuators that operate safely within the 0.15-0.4 MPa range.
Supplies regulated, lubricated air to small loom cylinders where excess pressure would damage fragile fibers.
Choose this lower-pressure type for equipment strictly limited to 0.4 MPa, matching the nylon bowl and 5 um element to sensitive environments. If your machine might ever exceed this ceiling, the standard type is required instead. The automatic drain suits unattended lines, and because no gauge is present, you must add one to the 1/8in port to read the set pressure. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator. The 5 um element catches finer particles than the 40 um default, demanding more frequent service. Stepping up to the GAC400 body shifts the plotted flow envelope from 3000 L/min to 6000 L/min at 0.7 MPa inlet. Keep in mind the 0.4 MPa ceiling is 44% of the standard 0.9 MPa limit.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl with a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The N in the code means no gauge is supplied from the factory. The body has a 1/8in gauge connection, so you can install your own gauge to monitor the 0.15-0.4 MPa outlet pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.