
The AirTAC GAC F.R.L. Unit GAC300N15ALTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC GAC300N15ALTK combines a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/2in port serves the 0.15-0.4 MPa (20-58 psi) lower-pressure range, trapping 40 um particles while a fitted circular gauge reads MPa/psi for the default NPT thread. A nylon bowl houses the 60 cc condensate sump and 98 cc oil reservoir.
The automatic drain clears condensate without an operator, which is decisive for unattended or wet lines. Because the lubricator sits last in the sequence, oil mist is added downstream of the regulator seat, preventing fouling. This specific configuration includes a reverse-flow (reflux) valve, which the catalogue draws as a separate pneumatic symbol with details on its own page.
| Model | Airtac GAC F.R.L. Unit GAC300N15ALTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate bagging and sealing actuators where a 0.15-0.4 MPa output prevents crushing thin films.
Conditions supply for benchtop pneumatic presses and grippers requiring a regulated, oil-misted flow below 58 psi.
Prepares 1/2in line air for looms and spinning frames, using the 60 cc drain bowl to capture lint and moisture.
Choose this 1300 g unit when a machine needs stable low-pressure air, as the L type tops out at 0.4 MPa. If the equipment may ever need more, the L type is the wrong part. The 40 um element suits general plant air, while the fitted NPT-thread gauge lets operators verify the setpoint visually. If a line must stay oil-free, omit the lubricator and choose a filter-regulator instead. For maintenance, the three units are separately orderable as GAF300-15, GAR300-15 and GAL300-15, so a clogged element does not mean replacing the whole assembly.
Stepping down to the GAC200 body drops the plotted flow envelope from 3000 L/min to 1750 L/min at 0.7 MPa inlet, whereas stepping up to the GAC400 increases it to 6000 L/min. Keep in mind that 0.4 MPa is about 44% of the Standard type's 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It weighs 1300 g, uses a 40 um element, and runs from -5 to 70 C. The drain bowl holds 60 cc, the oil bowl holds 98 cc, and the recommended lubricant is ISO VG 32.
The K indicates that a reverse-flow (reflux) valve is fitted to this unit. The catalogue shows this component as a separate pneumatic symbol with full details on its own page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.