
The AirTAC GAC F.R.L. Unit GAC300N15ALWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port serves the GAC300 body, which pairs a 60 cc condensate bowl with a 98 cc oil reservoir. Because the 5 um element sits upstream of the pressure control, fine particulate is trapped before it can reach precision valves. This lower-pressure type regulates between 0.15-0.4 MPa (20-58 psi).
The automatic drain clears accumulated water without an operator, a decisive feature for unattended or wet lines. A circular gauge is fitted, reading MPa/psi for the default NPT thread, so technicians can verify the set pressure directly. Weighing 1300 g, the assembly needs a proper panel or frame mount rather than relying on tubing support. If the machine requires oil-free output, omit the lubricator and choose a separate filter-regulator instead. Order code GAC300N15ALWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N15ALWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air to sensitive benchtop equipment where the 5 um element protects delicate gauges and the 0.4 MPa ceiling prevents overpressure damage.
Conditions air for small pneumatic clamps and pick-and-place actuators, using the automatic drain to handle condensate during long continuous runs.
Supplies a steady oil mist to loom and spinner bearings operating below 0.4 MPa, ensuring smooth motion without flooding the regulators.
This model uses a nylon bowl, which shares the same 1.0 MPa maximum pressure and -5 to 70 C temperature rating as the standard PC and metal options, making it a build choice where material compatibility must be confirmed for aggressive surroundings. The 5 um element provides finer filtration than the 40 um standard, trapping smaller particles for instrument air at the cost of more frequent element service. If the application ever requires more than 0.4 MPa, this lower-pressure type is the wrong part. The three units are separately orderable as GAF300-15, GAR300-15 and GAL300-15, so a clogged element or damaged bowl does not require replacing the whole assembly. Stepping down to the GAC200 body reduces the plotted flow envelope to 1750 L/min at 0.7 MPa inlet, whereas this GAC300 reaches 3000 L/min. Choosing the L type means the 0.4 MPa ceiling is just 44% of the standard 0.9 MPa maximum, a significant trade-off for low-pressure duties.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 60 cc drain bowl, a 98 cc oil bowl, a 5 um element, and weighs 1300 g. The recommended lubricant is ISO VG 32.
The W code specifies a 5 um element, which traps far finer particles than the 40 um standard for precision valves or instrument air. The A code indicates an automatic drain that clears condensate without an operator, a decisive feature for unattended or wet lines.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.