
The AirTAC GAC F.R.L. Unit GAC300N15ALWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatic equipment, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. This specific variant features a 1/2in port, a 5 um element and a nylon bowl. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the pressure-control mechanism.
Operating at a lower pressure range of 0.15-0.4 MPa (20-58 psi), it is built for sensitive circuits rather than high-force actuators. The automatic drain clears condensate from the 60 cc bowl without operator intervention, which is decisive for unattended or wet lines. A circular gauge is fitted, reading MPa/psi for the default NPT thread, and the reverse-flow (reflux) valve is included as an ordering difference, shown as a separate pneumatic symbol in the catalogue. Order code GAC300N15ALWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N15ALWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air to sensitive pneumatic pumps and actuators in lab equipment, where the 5 um element protects delicate internal flow controllers from particulate fouling.
Regulates air at 0.15-0.4 MPa for small-bore cylinders driving film feed mechanisms, ensuring gentle handling of thin packaging materials without tearing.
Supplies a steady, finely filtered air mist to low-pressure loom and spinner components, preventing dust ingress while maintaining consistent thread tension.
Choose this model for 1/2in ported systems requiring precise low-pressure control, ensuring the machine never exceeds 0.4 MPa. The 5 um element traps far finer particles than the standard 40 um grade, suiting precision valves and instrument air, though it requires more frequent element service. If the downstream line must remain completely oil-free, omit the lubricator and choose a filter-regulator instead. For maintenance, the three units are separately orderable as GAF300-15, GAR300-15 and GAL300-15, so a damaged bowl does not mean replacing the whole assembly. Stepping down to the GAC200 body reduces the plotted flow envelope to 1750 L/min at 0.7 MPa inlet, whereas this GAC300 reaches 3000 L/min. Keep in mind that 0.4 MPa is 44% of the Standard type's 0.9 MPa ceiling, so confirm your actuators can develop the required force within this lower limit.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model regulates air from 0.15-0.4 MPa (20-58 psi) and has a maximum pressure of 1.0 MPa (145 psi) with a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, uses a 5 um element, and features a 60 cc drain bowl with a 98 cc oil bowl. The unit weighs 1300 g and requires ISO VG 32 or equivalent lubricant.
The K indicates that a reverse-flow (reflux) valve is fitted to this unit. The catalogue shows this as a separate pneumatic symbol on its own page, and it is included here as a specific ordering difference without altering the core air-preparation function.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.