
The AirTAC GAC F.R.L. Unit GAC300N15ASWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatics, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/2in port serves the GAC300 body, which pairs a 60 cc condensate bowl with a 98 cc oil reservoir. Because the 5 um element sits upstream of the regulator, precision valves receive highly filtered air while the pressure seat stays clean.
This specific configuration uses a nylon bowl and an automatic drain, clearing condensate without an operator during each cycle. A circular gauge is fitted, reading MPa/psi for the default NPT thread. The assembly includes a reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol with details on its own page. Max pressure is 1.0 MPa (145 psi) over a -5 to 70 C operating range. Order code GAC300N15ASWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N15ASWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds 5 um filtered and lubricated air to tool changer cylinders on machining centers, protecting close-tolerance sliding seals from particulate ingress.
Conditions air for high-cycle packaging actuators, using the automatic drain to handle condensate generated during continuous daily production runs.
Supplies stable 0.15-0.9 MPa pressure to multi-stage loom and spinner actuators, adding oil mist downstream of the regulator for moving guide bearings.
Choose this 1300 g unit when a machine needs standard pressure regulation from 0.15-0.9 MPa (20-130 psi) alongside fine 5 um filtration. The nylon bowl suits standard plant environments, while the automatic drain cuts maintenance visits. Stepping down to the GAC200 drops the flow envelope from 3000 L/min to 1750 L/min at 0.7 MPa inlet, whereas stepping up to the GAC400 raises the drain bowl to 100 cc. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares follow the body-port suffix: GAF300-15, GAR300-15 and GAL300-15. The 1.5 MPa (215 psi) proof pressure provides a 1.5x burst-test margin over the 1.0 MPa maximum, though it is not permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. The temperature range is -5 to 70 C, the filtering grade is 5 um, and the recommended lubricant is ISO VG 32. The drain bowl holds 60 cc, the oil bowl holds 98 cc, and the unit weighs 1300 g.
The N before the port code indicates the 1/2in unit uses a nylon bowl, while the K at the end of the code signifies that a reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue. The unit also features a 5 um element for fine filtration and an automatic drain for unattended condensate removal.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.