
The AirTAC GAC F.R.L. Unit GAC300N15LNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this GAC300N15LNWT combines a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. It features a 1/2in port and uses a 5 um element to trap fine particles. The lower-pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi). Because the N appears after the port, no gauge is supplied, though a 1/8in gauge connection allows a future addition.
Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The nylon bowl holds 60 cc of condensate and 98 cc of oil. Weighing 1300 g, the assembly needs a firm panel or frame mount rather than tubing support. The semi-auto and manual drain pair clears accumulated water on demand. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N15LNWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds instrument air to sensitive solenoid banks using the 5 um element to prevent seat contamination on small-bore valves.
Regulates downstream air to 0.4 MPa for packaging lines using soft pneumatic grippers that operate safely at reduced pressures.
Conditions supply for test fixtures requiring a steady, low-pressure oil mist to protect delicate sliding components.
Choose this 1/2in port model for duties requiring highly filtered air at lower pressures, using its 5 um element for precision valves. The nylon bowl suits standard environments within the -5 to 70 C range, while the semi-auto and manual drain pair requires operator interaction to empty the 60 cc bowl. If a machine requires a pressure above 0.4 MPa, this lower-pressure type is the wrong part. Since no gauge is supplied, the set pressure cannot be read without adding one to the 1/8in connection. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. Spares are available as GAF300-15, GAR300-15 and GAL300-15. Stepping up to the GAC400 body increases the plotted flow envelope from 3000 to 6000 L/min at 0.7 MPa inlet, effectively doubling the capacity, but the L type ceiling of 0.4 MPa is just 44% of the 0.9 MPa standard maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 1/2in port, a 5 um element, a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The N after the 1/2in port code indicates no gauge is supplied. To read the set pressure, you must add a circular gauge to the 1/8in gauge connection, matching the MPa/psi scale of the default NPT thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.