verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC300 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC300N15LTK

The AirTAC GAC F.R.L. Unit GAC300N15LTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size1/2"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialNylon
  • Drainsemi-auto + manual
  • Pressure gaugeCircular, psi / bar
  • Weight1300 g
$103.78 $111.28Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC300-15 bowl, type and element option on one page All GAC300-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC300N15LTK

This GAC300N15LTK is a three-in-one air preparation assembly: a filter, a regulator and a lubricator mounted together on a single L-shaped bracket with quick clamps. The 1/2in port and 1300 g mass place it in the mid-size GAC300 class, suited to feeding a small machine header or a few actuators from one conditioned supply point. Air moves through the filter first, then the regulator, and the oil mist is added last so it never reaches the regulator seat.

The lower-pressure regulator is set for 0.15-0.4 MPa (20-58 psi), and a circular gauge with an MPa/psi scale is fitted to show the set point. The nylon bowls hold 60 cc of condensate and 98 cc of oil, and the 40 um element handles standard shop air. The reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue. Maximum supply is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi), and the unit is rated for -5 to 70 C without freezing. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC300N15LTK Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC300N15LTK
SeriesGAC300 F.R.L. combination
Port size1/2" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialNylon
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
Capacity of oil bowl98 cc
Recommended lubricantISO VG 32 or equivalent
Weight1300 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC300N15LTK

GAC300GA300 series F.R.L. unit — sets ports, bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
15Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC300 · 1/2" · curve to 3000 L/min
One size downGAC200
One size upGAC400 (curve to 6000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC300N15LTK Is Used

precision_manufacturing

Low-pressure assembly tools

Feed a workbench of pneumatic screwdrivers or nutrunners that need a stable 0.3 MPa supply, with the regulator holding the set point against small demand swings.

engineering

Lab or test fixtures

Condition air for a benchtop cylinder test rig or a leak-test fixture where a gentle, repeatable pressure under 0.4 MPa protects sensitive components.

factory

Single-station machine

Supply one semi-automatic assembly station with filtered, regulated and lubricated air for its clamping cylinder and a small parts-eject actuator.

Is the Airtac GAC F.R.L. Unit GAC300N15LTK the Right Air-Prep Unit?

Choose the GAC300N15LTK when a 1/2in port and a 0.15-0.4 MPa (20-58 psi) regulated output match your circuit, and when the line must stay oil-free downstream, remember this is a lubricating unit - pick a filter-regulator instead. The nylon bowls suit environments where a clear view of the contents is less important than impact resistance, and the semi-auto plus manual drain pair clears condensate on pressure drops or on demand. The 40 um element is the standard grade; the 5 um option is available as a W code if finer filtration is needed. The NPT thread carries the default MPa/psi gauge scale, and the K code adds the reverse-flow valve. Spare units for this body and port are the GAF300-15 filter, GAR300-15 regulator and GAL300-15 lubricator, each orderable separately.

The lower-pressure ceiling of 0.4 MPa is about 44% of what the standard 0.9 MPa type offers, so confirm the downstream demand never exceeds this before committing.

Quick checklist

  • ✓ Body size for your peak flow (1/2" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 1300 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC300N15LTK FAQ

The GAC300N15LTK is a GAC300-series F.R.L. combination with a 1/2in port. The lower-pressure regulator range is 0.15-0.4 MPa (20-58 psi). Maximum supply pressure is 1.0 MPa (145 psi) and proof pressure is 1.5 MPa (215 psi). Operating temperature is -5 to 70 C. The drain bowl holds 60 cc and the oil bowl 98 cc. Recommended lubricant is ISO VG 32. The unit weighs 1300 g.

The K code means a reverse-flow (reflux) valve is fitted to the GAC300N15LTK. The catalogue shows this valve as a separate pneumatic symbol in the circuit, with its own detail page. It is an ordering difference to note; the valve is included on this model.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC300N15LTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC300N15LTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.