
The AirTAC GAC F.R.L. Unit GAC300N15LWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/2in ported body operates at 0.15-0.4 MPa (20-58 psi) and uses a 5 um element to capture fine particles before they reach sensitive valves. A circular gauge reading MPa/psi is fitted for the default NPT thread.
Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The nylon bowl holds 60 cc of condensate and 98 cc of oil, while the reverse-flow (reflux) valve is fitted, appearing as a separate pneumatic symbol in the catalogue. Weighing 1300 g, the assembly uses quick mounting clamps to eliminate inter-unit tubing leaks. Order code GAC300N15LWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N15LWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure instrument air to sensitive solenoid valve banks, relying on the 5 um filter to prevent sticking in tight-tolerance spools.
Conditions air for delicate pick-and-place actuators operating below 0.4 MPa, ensuring smooth motion without bursting fragile film or pouches.
Supplies regulated, lubricated air to benchtop analytical equipment where the nylon bowl offers a non-metallic option for chemical-adjacent environments.
Choose this lower-pressure type if your application strictly stays under 0.4 MPa, as it cannot supply higher settings. The 5 um element provides finer filtration than the standard 40 um grade, ideal for instrument air, though it requires more frequent element changes. The semi-auto and manual drain pair gives operator-controlled condensate removal, and if your downstream line must remain oil-free, select a filter-regulator instead of this lubricated assembly. Replacement spares share the same body-port suffix: GAF300-15, GAR300-15 and GAL300-15.
The catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, offering about double the sizing envelope of the GAC200's 1750 L/min. Because the lower-pressure type tops out at 0.4 MPa, it provides only 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 1/2in port, a 5 um element, a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The K denotes that a reverse-flow (reflux) valve is fitted. The catalogue shows this as a separate pneumatic symbol with details on its own page, representing an ordering difference for this specific assembly.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.