
The AirTAC GAC F.R.L. Unit GAC300N15SNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC300N15SNWT assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a 5 um element to trap fine particulates before they reach precision valves. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the pressure-control mechanism.
The standard type operates from 0.15-0.9 MPa (20-130 psi), with a maximum pressure of 1.0 MPa (145 psi). This specific build uses a nylon bowl and omits the pressure gauge entirely; operators can add one later via the 1/8in gauge connection. Weighing 1300 g, the unit carries a 60 cc condensate bowl and a 98 cc oil reservoir, establishing a clear service interval for routine maintenance.
Choosing this configuration means balancing fine filtration against element service frequency, as the 5 um mesh clogs faster than the standard 40 um option. The semi-auto and manual drain pairing dumps condensate on pressure drop or on demand, suicing lines attended by personnel. If the downstream line must remain oil-free, omit the lubricator and select a separate filter-regulator instead. For maintenance, the individual spares are GAF300-15, GAR300-15 and GAL300-15. Stepping down to the GAC200 shrinks the plotted flow envelope from 3000 L/min to 1750 L/min at 0.7 MPa inlet, a 1.71x reduction in capacity. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N15SNWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Supplies finely filtered 5 um air to tool changer cylinders, ensuring spools and actuators operate without particulate interference.
Feeds regulated and lubricated air to the cutting and sealing jaws on high-speed packaging lines, maintaining consistent motion.
Conditions air for multi-valve manifolds in laboratory automation, where the nylon bowl prevents corrosion from ambient moisture.
This 1/2in ported unit fits applications requiring the GAC300 flow envelope plotted to 3000 L/min at 0.7 MPa inlet. The nylon bowl offers a non-metallic alternative where chemical compatibility is needed, though buyers must confirm suitability for aggressive environments. The semi-auto and manual drain pairing dumps condensate on pressure drop or on demand, suiting lines attended by personnel. If the downstream line must remain oil-free, omit the lubricator and select a separate filter-regulator instead. For maintenance, the individual spares are GAF300-15, GAR300-15 and GAL300-15. Stepping down to the GAC200 shrinks the plotted flow envelope from 3000 L/min to 1750 L/min at 0.7 MPa inlet, a 1.71x reduction in capacity.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) and tolerates a max pressure of 1.0 MPa (145 psi) with a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 1300 g, and pairs a 60 cc drain bowl with a 98 cc oil bowl. ISO VG 32 is the recommended lubricant.
The N in the code indicates no gauge is supplied, meaning the set pressure cannot be read without adding one. The body features a 1/8in gauge connection, allowing operators to install a compatible NPT-thread gauge reading in MPa/psi to monitor the 0.15-0.9 MPa range.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.