
The AirTAC GAC F.R.L. Unit GAC300N15SNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatics, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in ported GAC300 body operates at 0.15-0.9 MPa (20-130 psi) and uses a 5 um element to trap fine particles before they reach sensitive valves. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the pressure-control internals.
This specific configuration uses a nylon bowl and ships without a pressure gauge, though a 1/8in gauge connection is provided if operators need to add one later. The unit includes a reverse-flow (reflux) valve, which the catalogue illustrates as a separate pneumatic symbol with details on its own page. Condensate is managed by a paired semi-auto and manual drain system, emptying into a 60 cc bowl, while the 98 cc oil reservoir sets the lubrication refill interval. Order code GAC300N15SNWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N15SNWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds precision valve islands on machining centers where the 5 um element protects tight tolerances from particulate fouling.
Conditions air for pneumatic sealing jaws and clamps, with the 98 cc oil bowl providing sustained lubrication for rapid cycles.
Supplies clean, regulated air to high-speed diverter cylinders on package conveyors without needing continuous operator drainage.
Choose this 1300 g assembly when a mid-frame unit is required instead of the smaller GAC200 (which offers a 25 cc drain bowl) or the larger GAC400 (plotted to 6000 L/min at 0.7 MPa inlet versus this body's 3000 L/min envelope). The 5 um element here provides finer filtration than the standard 40 um grade, suiting instrument air or precision valve protection at the cost of more frequent element changes. If the downstream line must remain strictly oil-free, omit the lubricator and select a standalone filter-regulator instead. For maintenance, the three stages are separately orderable as GAF300-15, GAR300-15 and GAL300-15. Note that the standard type regulates up to 0.9 MPa, but because maximum supply is 1.0 MPa, there is only about 0.1 MPa of regulation headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, has a 60 cc drain bowl and a 98 cc oil bowl, and requires ISO VG 32 lubricant.
The N in the ordering code indicates no gauge is supplied, so the set pressure cannot be read without adding one to the 1/8in gauge connection. This setup is often chosen when a gauge is already mounted elsewhere on the panel or when a digital transducer is preferred.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.