
The AirTAC GAC F.R.L. Unit GAC300N15ST is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC unit integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a standard 0.15-0.9 MPa (20-130 psi) operating range and a 40 um element to condition supply lines effectively.
Air passes through the filter first, then the regulator, before oil mist is introduced last by the lubricator so the regulator seat never gets fouled. The nylon bowl holds 60 cc of condensate and 98 cc of oil, while a circular gauge reading MPa/psi is fitted to verify the set pressure. Order code GAC300N15ST has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N15ST |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds main air headers for automated production lines where multiple cylinders require steady pressure and continuous oil mist.
Conditions air for high-speed packaging equipment, protecting valves and grippers from particulate ingress with its 40 um element.
Supplies lubricated air to pneumatic diverters and stoppers on package conveyors, extending actuator seal life.
This 1300 g assembly needs a firm panel or frame mount rather than tubing support. The nylon bowl suits standard plant environments, and the semi-auto drain dumps condensate on every pressure drop with a manual option for on-demand emptying. If a machine requires completely dry air without oil mist downstream, omit the lubricator and choose a dedicated filter-regulator instead. Replacement spares share the exact 300-15 suffix: order GAF300-15, GAR300-15 and GAL300-15 individually. The catalogue flow curve for this body is plotted to 3000 L/min at 0.7 MPa inlet, which is roughly 50% of the 6000 L/min envelope plotted for the GAC400, helping you size up if demand spikes. Stepping down, the 1.5 MPa proof pressure against the 1.0 MPa maximum provides a 1.5x burst-test margin, but this is strictly a safety rating and never permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the drain bowl holds 60 cc, the oil bowl holds 98 cc, the unit weighs 1300 g, and the recommended lubricant is ISO VG 32.
This unit is fitted with both a semi-auto and a manual drain. The semi-auto mechanism expels condensate automatically whenever the air pressure drops, while the manual drain allows operators to purge the 60 cc bowl on demand during scheduled checks.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.