
The AirTAC GAC F.R.L. Unit GAC40015ALNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatics, this AirTAC GAC40015ALNT combines a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port serves machines needing a lower operating band of 0.15-0.4 MPa (20-58 psi), while the 40 um element captures solid grain before it reaches downstream valves. Weighing 2390 g, the assembly uses quick mounting clamps to eliminate inter-unit tubing, creating a leak-free installation in one step.
Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the pressure control mechanism. This specific unit ships without a gauge, though a 1/4in connection is provided to mount one if visual pressure verification is needed. An automatic drain actively clears the 100 cc condensate bowl without operator intervention, a crucial feature for unattended or wet air lines. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40015ALNT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds wrapping and sealing actuators that rely on gentle, regulated pressure below 0.4 MPa to prevent crushing delicate cartons.
Conditions air for light-duty air motors and screwdrivers where lower pressure extends tool life and prevents over-torquing fasteners.
Supplies sensitive analytical instruments and low-pressure cylinder drives that require stable, finely tuned air delivery without high-force risks.
Choose this configuration when a system requires strictly limited downstream pressure, as the L type tops out at 0.4 MPa; if the machinery might ever demand more, the standard 0.15-0.9 MPa type is the correct choice. The PC bowl handles standard -5 to 70 C environments, while the automatic drain suits remote locations where manual condensate evacuation is impractical. Stepping up from the GAC300 increases the plotted flow envelope from 3000 to 6000 L/min at 0.7 MPa inlet, doubling the available air capacity for larger actuators. If the downstream process requires clean, non-lubricated air, omit the lubricator and select a dedicated filter-regulator instead. Maintenance is modular, with replacement spares available as GAF400-15, GAR400-15 and GAL400-15. Choosing this lower-pressure type restricts the output ceiling to 44% of the standard 0.9 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, uses a 40 um element, and weighs 2390 g. The drain bowl holds 100 cc and the oil bowl holds 185 cc, requiring ISO VG 32 or equivalent lubricant.
The N in the product code indicates no gauge is supplied, meaning the set pressure cannot be read without adding one. The body features a 1/4in gauge connection, allowing operators to install a compatible NPT-thread gauge with an MPa/psi scale to monitor the 0.15-0.4 MPa output.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.