verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC400 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC40015ALT

The AirTAC GAC F.R.L. Unit GAC40015ALT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size1/2"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeCircular, psi / bar
  • Weight2390 g
$124.51 $132.01Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC400-15 bowl, type and element option on one page All GAC400-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC40015ALT

Delivering cleaned, regulated and lubricated air for pneumatic machinery, this assembly pairs a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port serves mid-scale duties, and the 40 um element captures solid grain before the regulator sets a stable 0.15-0.4 MPa (20-58 psi) outlet pressure. A circular gauge reading MPa/psi is fitted for the default NPT thread, letting operators verify the setpoint directly.

The automatic drain clears condensate from the 100 cc bowl without an operator, a decisive feature for unattended or wet lines. Because the lubricator sits last in the sequence, oil mist is added downstream of the regulator seat, preventing fouling. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. Order code GAC40015ALT has NPT ports (the T in the code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC40015ALT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC40015ALT
SeriesGAC400 F.R.L. combination
Port size1/2" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl100 cc
Capacity of oil bowl185 cc
Recommended lubricantISO VG 32 or equivalent
Weight2390 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC40015ALT

GAC400GA400 series F.R.L. unit — sets ports, bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
15Port size 1/2". This body offers 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC400 · 1/2" · curve to 6000 L/min
One size downGAC300
One size upGAC500 (curve to 7000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC40015ALT Is Used

factory

Textile Machinery

Feeds low-pressure air to looms and spinning frames where delicate fibers require consistent, lubricated actuation below 0.4 MPa.

package_2

Carton Erectors

Conditions air for pneumatic folding arms and sealers, with the automatic drain handling condensate during long, unattended packaging runs.

conveyor_belt

Light Assembly Lines

Supplies a 1/2in main feed to multiple small actuators and pick-and-place units, ensuring steady pressure and oil mist for moving parts.

Is the Airtac GAC F.R.L. Unit GAC40015ALT the Right Air-Prep Unit?

Choose this lower-pressure L type for equipment strictly capped at 0.4 MPa; if the machine may ever need more, select the standard S type, as the L type is the wrong part for higher demands. The PC bowl suits general environments, while the fitted 40 um element balances protection and service frequency. For maintenance, the three units are separately orderable as GAF400-15, GAR400-15 and GAL400-15, so a clogged element does not require replacing the whole assembly. Stepping down to the GAC300 halves the plotted flow envelope to 3000 L/min at 0.7 MPa inlet, whereas this body reaches 6000 L/min. Keep in mind the 0.4 MPa ceiling is 44% of the standard 0.9 MPa maximum.

Quick checklist

  • ✓ Body size for your peak flow (1/2" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 100 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 2390 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC40015ALT FAQ

This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, uses a 40 um element, and features a 100 cc drain bowl with a 185 cc oil bowl. The assembly weighs 2390 g and requires ISO VG 32 or equivalent lubricant.

The A in the ordering code denotes an automatic drain fitted to the PC bowl. It expels condensate automatically without operator intervention, making the unit ideal for wet lines or remote installations where manual draining is impractical.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC40015ALT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC40015ALT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.