
The AirTAC GAC F.R.L. Unit GAC40015ASNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for demanding pneumatics, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/2in port serves mid-to-large duties, while the 5 um element captures fine particulates to protect precision valves. Because the lubricator sits last in the sequence, oil mist enters downstream of the regulator seat, preventing fouling.
This specific configuration uses a PC bowl and an automatic drain to clear condensate without operator intervention. No gauge is supplied, but a 1/4in gauge connection allows adding one to read the set pressure. The reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue. Operating pressure spans 0.15-0.9 MPa (20-130 psi), and the assembly weighs 2390 g. Order code GAC40015ASNWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40015ASNWTK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds multiple pneumatic actuators and presses on a car manufacturing line, relying on the 5 um element to protect precision valves from fine debris.
Conditions air for continuous packaging machinery where the automatic drain handles condensate without halting production shifts.
Supplies clean, lubricated air to pneumatic tool changers and clamping systems on large CNC machining centers.
Choose this 1/2in body when a smaller unit lacks capacity; the catalogue flow curve for the GAC400 is plotted to 6000 L/min at 0.7 MPa inlet, exactly double the GAC300's 3000 L/min envelope. The 100 cc drain bowl and 185 cc oil bowl mean fewer service interventions than smaller bodies. The automatic drain suits unattended or wet lines, while the 5 um element trades a slightly shorter service life for finer filtration than the standard 40 um grade.
If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares are ordered individually as GAF400-15, GAR400-15 and GAL400-15. Stepping up from the GAC300, the GAC400's 6000 L/min plotted flow envelope is a 2x increase at 0.7 MPa inlet.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 100 cc drain bowl, a 185 cc oil bowl, and weighs 2390 g. The recommended lubricant is ISO VG 32.
The N after the port means no gauge is supplied, though a 1/4in connection is available if you need to add one. The K indicates a reverse-flow (reflux) valve is fitted, which the catalogue details as a separate pneumatic symbol on its own page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.