
The AirTAC GAC F.R.L. Unit GAC40015ASTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for demanding pneumatics, this AirTAC GAC40015ASTK F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a 2390 g mass, placing it firmly in a mid-to-heavy size class that requires a solid panel or frame mount rather than tubing support. The standard type provides a 0.15-0.9 MPa (20-130 psi) operating range, while the 40 um element captures solid grain before it reaches downstream valves.
The build sequence routes air through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. Because this code carries the automatic drain option, condensate is expelled from the 100 cc bowl without an operator present, making it highly practical for wet lines or unattended shifts. A circular gauge is fitted, reading MPa/psi for the default NPT thread, and the reverse-flow (reflux) valve is included, shown in the catalogue as a separate pneumatic symbol.
| Model | Airtac GAC F.R.L. Unit GAC40015ASTK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds multiple pneumatic presses and robotic arms on a 1/2in header, relying on the 100 cc automatic drain to handle moisture during continuous two-shift production.
Provides consistent 0.9 MPa air and oil mist to the cylinders folding and sealing cardboard boxes, preventing stalling during high-speed cyclic operation.
Conditions air for pneumatic pushers routing parcels, where the 40 um element protects solenoid valves from grit in the factory main.
Choose this 1/2in PC bowl configuration for medium-capacity lines where unattended condensate removal is required. If your machine needs finer protection for precision valves, the 5 um element (W option) traps smaller particles but requires more frequent service. For aggressive surroundings, confirm material compatibility before selecting PC over metal or nylon alternatives. If the downstream line must remain strictly oil-free, omit the lubricator and choose a filter-regulator instead. The three constituent units are separately orderable as GAF400-15, GAR400-15 and GAL400-15, meaning a damaged bowl does not require replacing the whole assembly. Stepping down to the GAC300 body reduces the plotted flow envelope to 3000 L/min at 0.7 MPa inlet, exactly half of this unit's 6000 L/min envelope. Keep in mind the overpressure margin: the 1.5 MPa proof pressure against the 1.0 MPa maximum provides a 1.5x burst-test margin, which is not permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 100 cc drain bowl, a 185 cc oil bowl, a 40 um element, and weighs 2390 g. The recommended lubricant is ISO VG 32 or equivalent.
The K indicates that a reverse-flow (reflux) valve is fitted to the unit. The catalogue displays this as a separate pneumatic symbol with details on its own page, representing an ordering difference for specific application requirements.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.