
The AirTAC GAC F.R.L. Unit GAC40015ASWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, pressure-set and oil-misted air for demanding pneumatics, the AirTAC GAC40015ASWT combines a filter, regulator and lubricator on a single L-shape bracket. This 1/2in ported unit uses a 5 um element to trap fine particles before they reach precision valves, operating within a 0.15-0.9 MPa (20-130 psi) standard pressure range.
Air travels through the filter first, then the regulator, so the lubricator adds oil mist downstream without fouling the regulator seat. The 2390 g assembly features a PC bowl and an automatic drain that clears condensate without an operator, while the fitted circular gauge reads in MPa/psi for the default NPT thread.
| Model | Airtac GAC F.R.L. Unit GAC40015ASWT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Supplies finely filtered, lubricated air to pneumatic tool changers and precision actuators on CNC machining centers.
Conditions air for high-speed flow wrappers and sealing jaws where consistent pressure and oil mist protect moving parts.
Feeds multi-station robotic arms requiring a 5 um element to prevent valve sticking in high-cycle operations.
Choose this GAC400 body for mid-to-heavy duties where the 5 um element protects sensitive instrumentation, stepping up from the GAC300 which offers a 3000 L/min plotted flow envelope at 0.7 MPa inlet versus this body's 6000 L/min. The automatic drain is decisive for unattended or wet lines, and the fitted gauge lets operators verify the set pressure directly. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares are ordered individually as GAF400-15, GAR400-15 and GAL400-15, all sharing the same body and port. Because the maximum supply is 1.0 MPa and the standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 1/2in port, a 100 cc drain bowl, a 185 cc oil bowl, weighs 2390 g, and runs from -5 to 70 C using ISO VG 32 lubricant.
The 5 um element traps far finer particles than the standard 40 um grade, making it ideal for precision valves or instrument air, though it requires more frequent element service. The automatic drain clears condensate without an operator, which is decisive for unattended or wet lines.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.