
The AirTAC GAC F.R.L. Unit GAC40015ASWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for demanding pneumatics, this GAC40015ASWTK integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port serves as the inlet for a 5 um element, trapping fine particulates before air reaches precision valves. Operating pressure spans 0.15-0.9 MPa (20-130 psi), while the fitted circular gauge reads in MPa/psi for the default NPT thread.
Air routes sequentially through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat stays clean. Weighing 2390 g, this assembly requires a solid panel mount rather than tubing support. It includes an automatic drain that clears condensate from the 100 cc bowl without operator intervention, and a reverse-flow (reflux) valve shown as a separate pneumatic symbol in the catalogue.
| Model | Airtac GAC F.R.L. Unit GAC40015ASWTK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Supplies finely filtered, lubricated air at a stable pressure to pneumatic tool changers and precision actuators on CNC machining centers.
Conditions air for continuous-motion packaging lines where the automatic drain prevents condensate buildup during unattended shifts.
Feeds multi-station looms and spinning frames where the 5 um element protects sensitive air-jet nozzles from microscopic grit.
Choose this body when a mid-size unit is required, noting the catalogue flow curve for the GAC400 is plotted to 6000 L/min at 0.7 MPa inlet, double the 3000 L/min envelope of the GAC300. The 5 um element provides finer protection than the standard 40 um grade, ideal for instrument air, at the cost of more frequent element service. If the downstream line must remain strictly oil-free, omit the lubricator and select a filter-regulator instead. Should a component fail, order spares using the shared suffix: GAF400-15, GAR400-15 and GAL400-15. Because the 1.5 MPa (215 psi) proof pressure is a burst-test margin against the 1.0 MPa (145 psi) maximum, it offers a 1.5x safety factor rather than permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 2390 g, and features a 100 cc drain bowl with a 185 cc oil bowl. The recommended lubricant is ISO VG 32.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue depicts this as a separate pneumatic symbol with details on its own page. This model also includes a circular gauge reading MPa/psi and a 5 um filtration element.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.