
The AirTAC GAC F.R.L. Unit GAC40015LNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatic setups, this GAC40015LNT assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a 2390 g body mass, placing it firmly in a size class that requires a proper panel or frame mount rather than relying on tubing support. Air passes through the filter first, then the regulator, with oil mist added last so the internal seat never fouls.
Configured for low-pressure duties, the unit regulates between 0.15-0.4 MPa (20-58 psi) and uses a standard 40 um element. Because the N follows the port, no pressure gauge is supplied; the 1/4in gauge connection allows a separate instrument to be added later if visual monitoring is needed. The 100 cc condensate bowl and 185 cc oil reservoir dictate the maintenance interval, setting how often an operator must attend to the unit. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40015LNT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air to loom actuators and tensioning cylinders where delicate fabric handling demands a strict 0.4 MPa ceiling.
Conditions air for folding and sealing mechanisms, adding the required oil mist to keep moving gripper joints lubricated during extended runs.
Supplies steady, regulated pressure to pneumatic pop-up sorting arms on packaging lines, preventing impact damage to lightweight goods.
Choose this configuration when a machine requires a maximum outlet setting of 0.4 MPa, as the lower-pressure type tops out well below the 0.9 MPa standard range. The semi-auto and manual drain pair is fitted, meaning the bowl dumps condensate on every pressure drop or via manual override. If the application requires oil-free air downstream, the lubricator must be omitted entirely and a separate filter-regulator chosen instead. Should a component fail, the assembly splits into GAF400-15, GAR400-15 and GAL400-15 spares, all sharing the identical body and port suffix. Stepping down to the GAC300 body reduces the plotted flow envelope from 6000 L/min to 3000 L/min at 0.7 MPa inlet, whereas moving up to the GAC500 keeps a similar flow but changes the port options. Choosing the L type means the 0.4 MPa ceiling is just 44% of the standard 0.9 MPa limit.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 100 cc drain bowl, a 185 cc oil bowl, a 40 um element, and weighs 2390 g. The recommended lubricant is ISO VG 32.
The N after the port code indicates no gauge is supplied. The body features a 1/4in gauge connection, allowing operators to install a separate pressure measuring instrument if visual monitoring of the 0.15-0.4 MPa range is required at the machine.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.