
The AirTAC GAC F.R.L. Unit GAC40015LT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatics, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port serves the GAC400 body class, which carries a 2390 g mass and a 100 cc condensate bowl. Because the build order routes air through the filter first and the lubricator last, the oil mist is introduced downstream of the regulator seat, preventing fouling of the internal pressure-control components.
Configured for low-pressure duties, the unit regulates between 0.15-0.4 MPa (20-58 psi). A 40 um element captures solid particulates, while a semi-auto drain pairs with a manual drain to clear accumulated moisture. The fitted circular gauge reads MPa/psi to match the default NPT thread, giving operators a direct visual check of the set pressure. Spares follow the body-port suffix exactly: GAF400-15, GAR400-15 and GAL400-15. Order code GAC40015LT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40015LT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds regulated air to pneumatic presses that seat delicate bearings, ensuring clamping force never exceeds the 0.4 MPa ceiling.
Conditions air for the folding and sealing cylinders on mid-volume packaging equipment, with the 100 cc bowl catching condensate from long duty cycles.
Supplies stable, lubricated air to multi-valve test manifolds where the 1/2in port supports the required distribution flow without starving downstream stations.
Choose this assembly when a machine requires stable downstream pressure capped at 0.4 MPa, as the lower-pressure type prevents accidental over-pressurization of sensitive actuators. The standard 40 um element suits general factory air, whereas stepping up to a 5 um variant is advised for finer instrument protection. The PC bowl handles routine ambient conditions, and the semi-auto plus manual drain pairing gives operators direct control over condensate evacuation. If the downstream line must remain oil-free, omit the lubricator and select a filter-regulator instead. The 1/4in gauge connection accommodates the fitted pressure indicator, and replacement parts share the GAF400-15, GAR400-15 and GAL400-15 designations. The 0.15-0.4 MPa operating window is 44% of the standard 0.9 MPa ceiling, so verify your actuators never require higher pressure before specifying this L-type unit.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32. The unit weighs 2390 g, features a 100 cc drain bowl and a 185 cc oil bowl, and uses a 40 um filter element.
It ships with both a semi-auto drain and a manual drain fitted, allowing condensate to discharge on pressure drop or on operator demand. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.