
The AirTAC GAC F.R.L. Unit GAC40015SNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This GAC40015SNWT is a three-unit F.R.L. combination - a filter, regulator and lubricator pre-assembled on one L-shape bracket with quick mounting clamps. Air passes through the filter (5 um element), then the regulator holding 0.15-0.9 MPa (20-130 psi), and finally the lubricator adds oil mist downstream, so the oil never reaches the regulator seat. The 1/2in port and 2390 g mass place it in the mid-size class, needing a proper panel or frame mount rather than tubing support.
No gauge is supplied on this model, but the 1/4in gauge connection is ready if you add one later. The 100 cc condensate bowl and 185 cc oil bowl define the service interval - larger than the GAC300's 60 cc drain bowl, so this unit needs less frequent attention. The PC bowl and 5 um element suit general industrial lines where finer filtration matters more than impact resistance. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40015SNWT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feed a CNC machining center's tool changer and workholding clamps with 5 um filtered air, keeping fine particles out of precision valves and spindles.
Power multiple pneumatic actuators on an automotive assembly station, where the 1/2in port and 6000 L/min envelope support several cylinders in parallel.
Condition air for carton erectors and case sealers, where regulated pressure and oil mist keep moving parts cycling smoothly through long shifts.
Choose this GAC40015SNWT for a 1/2in port line needing 5 um filtration. The PC bowl suits standard shop air; if you need a metal or nylon bowl, those are separate codes. The semi-auto drain dumps condensate on each pressure drop, with a manual backup for on-demand draining. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The 5 um element traps finer particles than the standard 40 um, at the cost of more frequent element service. Spares are GAF400-15, GAR400-15 and GAL400-15, all sharing the same body-port suffix.
Compare this against the GAC300's 3000 L/min flow envelope: the GAC400's curve is plotted to 6000 L/min at 0.7 MPa inlet, so it handles roughly double the flow of the smaller body. The proof pressure of 1.5 MPa against the 1.0 MPa maximum is a 1.5x margin - a burst-test safety factor, not permission to exceed 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
The GAC40015SNWT operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 100 cc and the oil bowl 185 cc. Recommended lubricant is ISO VG 32. The unit weighs 2390 g and has a 1/2in port.
The N in the code means no gauge is supplied. The 1/4in gauge connection is present, so you can add a circular gauge later if you need to read the set pressure directly. Until then, the outlet pressure must be verified with a separate test gauge or inferred from the regulator setting.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.