
The AirTAC GAC F.R.L. Unit GAC40015ST is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for medium-duty pneumatics, this assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a 2390 g mass, requiring a solid frame mount rather than tubing support. A 40 um element extracts particulates, while the standard type governs pressure from 0.15-0.9 MPa (20-130 psi).
Air routes through the filter first, then the regulator, ensuring oil mist is added downstream so the regulator seat stays clean. The PC bowl holds 100 cc of condensate and 185 cc of oil, dictating the maintenance rhythm. A circular gauge is fitted, reading MPa/psi for the default NPT thread, letting operators verify the setpoint directly. Order code GAC40015ST has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40015ST |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds multiple pneumatic torque wrenches and actuators on a car body welding station where consistent 1/2in air supply is critical.
Provides stable pressure and oil mist to the large bore cylinders opening and sealing corrugated boxes at high cycle rates.
Conditions air for diverter gates and pushers in a beverage bottling plant, handling moisture from continuous compressor operation.
Choose this body when a 1/2in line needs conditioning, stepping up from the GAC300 which offers a 3000 L/min plotted flow envelope at 0.7 MPa inlet versus this unit's 6000 L/min. The PC bowl suits standard plant environments, and the semi-auto plus manual drain pair dumps condensate on every pressure drop or on demand. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares share the exact suffix: GAF400-15, GAR400-15 and GAL400-15. Because the 1.5 MPa proof pressure is a 1.5x burst-test margin over the 1.0 MPa maximum, it is never permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It handles temperatures from -5 to 70 C, features a 100 cc drain bowl and a 185 cc oil bowl, uses ISO VG 32 lubricant, and weighs 2390 g.
It ships with both a semi-auto drain that empties condensate on each pressure drop and a manual drain for on-demand emptying. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.