
The AirTAC GAC F.R.L. Unit GAC40015SWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for mid-sized pneumatic setups, this GAC40015SWT unit integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a 2390 g mass, placing it firmly in a heavy-duty size class that requires mounting to a frame rather than relying on tubing support. Air passes through the filter first, then the regulator, with oil mist injected last so the internal regulator seat never fouls.
This specific configuration features a 5 um element to trap fine particles for sensitive instrumentation, trading off element service frequency for higher protection. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. A semi-automatic and manual drain pair is installed to clear the 100 cc condensate bowl.
| Model | Airtac GAC F.R.L. Unit GAC40015SWT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds precision valve islands on machining centers where the 5 um element protects sensitive tool-changer actuators from microscopic grit.
Conditions air for high-speed packaging equipment, supplying steady pressure to film extrusion and cutting cylinders via the 1/2in port.
Lubricates and regulates air for loom and spinneret mechanisms, ensuring continuous oil mist delivery to fast-moving moving parts.
Choose this configuration when a machine demands exceptionally clean air, as the 5 um element catches far finer particulates than the 40 um standard. The PC bowl is suitable for general industrial environments, while the semi-auto drain dumps condensate on every pressure drop, complemented by a manual override. If the downstream line must remain completely free of oil, omit the lubricator and select a dedicated filter-regulator instead. Should you need to scale flow capacity, the catalogue curve for the GAC500 is plotted to 7000 L/min at 0.7 MPa inlet, whereas this GAC400 reaches 6000 L/min under the same conditions. Replacement spares share the same body and port designation: GAF400-15, GAR400-15 and GAL400-15. Because the maximum supply is 1.0 MPa and the standard type regulates up to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
The standard pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, uses a 100 cc drain bowl and a 185 cc oil bowl, weighs 2390 g, and requires ISO VG 32 lubricant.
The 5 um filter grade, indicated by the W code, traps significantly finer particles than the 40 um standard. This provides superior protection for precision valves and instrument air, though the tighter mesh means the element will require more frequent replacement.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.