
The AirTAC GAC F.R.L. Unit GAC400C15ALNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for medium-duty pneumatics, this GAC400 unit combines a filter, regulator and lubricator on a single L-shape bracket. It features a 1/2in port, a 40 um element and a metal bowl. Because the type code is L, the regulating range spans 0.15-0.4 MPa (20-58 psi). The automatic drain clears condensate without an operator, which is decisive for unattended or wet lines.
Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. Weighing 2390 g, this assembly needs a proper panel or frame mount rather than tubing support. No gauge is supplied, but a 1/4in gauge connection allows adding one if reading the set pressure becomes necessary. Spares are GAF400-15, GAR400-15 and GAL400-15. Order code GAC400C15ALNT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC400C15ALNT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air to loom actuators where a 0.4 MPa ceiling prevents fabric damage, while the auto drain handles humid environments.
Supplies steady 1/2in flow to folding and sealing cylinders, adding oil mist downstream to protect moving gripper jaws.
Conditions air for diverters on medium-duty parcel belts, using the 40 um element to protect valves from grit.
Choose this metal-bowl assembly for 1/2in lines where operators cannot attend the drain, as the automatic feature empties the 100 cc condensate bowl independently. The 40 um element suits general plant air, while the lower-pressure type tops out at 0.4 MPa. If the machine might ever need more, the L type is the wrong part. Note that oil mist is added downstream; choose a filter-regulator if the line must stay oil-free. Stepping up to the GAC500 brings a 108 cc drain bowl, whereas dropping to the GAC300 limits you to a 60 cc bowl and a 3000 L/min flow curve plotted at 0.7 MPa inlet. The 0.4 MPa ceiling is 44% of the standard 0.9 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). Temperature ranges from -5 to 70 C. The drain bowl is 100 cc, the oil bowl is 185 cc, and the unit weighs 2390 g. Use ISO VG 32 lubricant.
No gauge is supplied. The N after the port means you cannot read the set pressure unless you add one. The body features a 1/4in gauge connection for easy installation of a compatible pressure gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.