
The AirTAC GAC F.R.L. Unit GAC400C15ALNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering finely cleaned, lubricated and pressure-set air, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/2in ported body carries a 5 um element for precision pneumatic duties, operating within the 0.15-0.4 MPa (20-58 psi) lower pressure range.
Air passes through the filter before the regulator, ensuring the internal seat stays free of oil while the lubricator introduces mist downstream. The metal bowl equips this assembly for rugged environments, and the automatic drain empties the 100 cc condensate sump without operator input.
Since no gauge is supplied, the set pressure cannot be read directly without adding one to the 1/4in gauge connection. If the machinery ever requires pressure above 0.4 MPa, this lower-pressure type is the wrong choice. Order code GAC400C15ALNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC400C15ALNWT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive directional valves requiring 5 um filtration and low, stable 0.4 MPa operating pressure.
Conditions air for delicate product handling actuators where lower pressure prevents crushing forces.
Supplies metered oil mist and regulated air to benchtop pneumatic test rigs within a 1/2in piped circuit.
Choose this 2390 g assembly for mid-capacity lines where a 5 um element protects sensitive valves and the 0.15-0.4 MPa (20-58 psi) ceiling is sufficient. The metal bowl suits harsher industrial settings, while the automatic drain clears condensate from the 100 cc sump unattended. Because the lubricator injects oil downstream, select a separate filter-regulator if the line must remain oil-free. Should the element clog or a bowl crack, order the individual GAF400-15, GAR400-15 and GAL400-15 spares rather than replacing the whole unit. Keep in mind that 0.4 MPa is 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 2390 g, holds 100 cc of condensate and 185 cc of oil, and uses ISO VG 32 lubricant.
The N in the code means no gauge is supplied, so the set pressure cannot be read unless you fit one to the 1/4in gauge connection. The default NPT thread dictates an MPa/psi scale if a gauge is added later.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.