
The AirTAC GAC F.R.L. Unit GAC400C15LNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for medium-duty pneumatics, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in ported body hosts a 5 um element for fine particle retention, while the metal bowl equips the 100 cc condensate sump. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal pressure spring.
Configured for low-pressure duties, the unit regulates between 0.15-0.4 MPa (20-58 psi). No gauge is supplied, leaving the 1/4in gauge port open for a user-selected instrument reading MPa/psi. The assembly weighs 2390 g, requiring a firm panel or frame mount rather than tubing support. If the downstream line must remain oil-free, omit the lubricator and choose a dedicated filter-regulator instead. Order code GAC400C15LNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC400C15LNWT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive directional valves in a machining center where the 5 um element prevents spool sticking from fine particulates.
Supplies 0.4 MPa regulated air to delicate film-handling grippers that would rupture or deform under standard 0.9 MPa inlet pressures.
Conditions air for multi-station loom actuation, using the 185 cc oil bowl to extend the lubrication intervals on continuous shift work.
This model carries a metal bowl and a 5 um element, trading the standard 40 um filtration for finer protection suited to precision valves, at the cost of more frequent element changes. The semi-auto and manual drain pair is fitted to the 100 cc sump, emptying condensate on every pressure drop or on operator demand. Spares are ordered individually as GAF400-15, GAR400-15 and GAL400-15, sharing the exact same body and port. Stepping up to the GAC500 roughly doubles the flow envelope to 7000 L/min at 0.7 MPa inlet, but this 6000 L/min body offers a smaller footprint for mid-range flows. Because the L type tops out at 0.4 MPa, it provides only 44% of the standard 0.9 MPa ceiling, so select it only for low-force actuators.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, features a 100 cc drain bowl and a 185 cc oil bowl, and weighs 2390 g. The recommended lubricant is ISO VG 32.
The N in the ordering code denotes that no circular gauge is supplied. The block leaves a 1/4in gauge connection open, allowing operators to install a specific NPT-threaded instrument with an MPa/psi scale to match their local reading preferences.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.