
The AirTAC GAC F.R.L. Unit GAC400C15LTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for mid-sized pneumatics, this AirTAC GAC400C15LTK combines a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a 40 um element and a lower pressure range of 0.15-0.4 MPa (20-58 psi). A metal bowl houses the 100 cc condensate sump and 185 cc oil reservoir.
Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The assembly includes a reverse-flow (reflux) valve, which the catalogue depicts as a distinct pneumatic symbol with details on its own page. A circular gauge is fitted, reading in MPa/psi to match the default NPT thread.
| Model | Airtac GAC F.R.L. Unit GAC400C15LTK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air looms and spinning frames where a 0.4 MPa ceiling protects delicate fibers from overstretching.
Supplies metered oil mist and steady 1/2in flow to folding and sealing actuators that cycle continuously on packaging lines.
Conditions air for pneumatic grippers feeding sheet metal into presses, relying on the 40 um element to protect sliding seals.
Choose this 2390 g body for duties needing a larger sump than the GAC300 (which holds 60 cc), as the 100 cc drain bowl extends service intervals. The semi-auto and manual drain pair clears condensate on every pressure drop or on demand. If the machine might ever exceed 0.4 MPa, the L type is the wrong part, as it tops out at roughly 44% of the standard 0.9 MPa ceiling. Because oil mist is added downstream, select a filter-regulator instead if the line must stay oil-free. Spares share the 400-15 suffix: GAF400-15, GAR400-15, GAL400-15. Note that 0.4 MPa is 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). Operating temperature is -5 to 70 C. The drain bowl holds 100 cc, the oil bowl 185 cc, and the unit weighs 2390 g. Use ISO VG 32 lubricant.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue shows this as a separate pneumatic symbol with specifics on its own page. This model also uses a metal bowl and a NPT thread with a gauge reading in MPa/psi.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.