
The AirTAC GAC F.R.L. Unit GAC400C15SNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for demanding pneumatics, this GAC400C15SNT assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a 2390 g mass, placing it firmly in a mid-to-heavy size class that requires a solid frame mount rather than tubing support. Air passes through the 40 um element first, then the regulator, ensuring oil mist is added downstream so the regulator seat never fouls. The metal bowl equips this unit for rugged industrial environments.
Operating at a standard pressure range of 0.15-0.9 MPa (20-130 psi), the unit handles up to 1.0 MPa (145 psi) maximum. Because the code carries an N after the port, no pressure gauge is supplied; the 1/4in gauge connection allows adding one later if reading the set pressure becomes necessary. Condensate management relies on a semi-auto and manual drain pair within the 100 cc drain bowl, while the 185 cc oil reservoir sets the lubrication service interval. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC400C15SNT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-15 filter, GAR400-15 regulator, GAL400-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds main air headers for robotic welding cells and stamping presses where a 1/2in port supplies high volume to multiple actuators.
Conditions air for continuous motion folders and sealers, relying on the 100 cc drain bowl to capture moisture from high-cycle pneumatic cylinders.
Protects diverter gates and pushers by removing 40 um particulates while adding a controlled oil mist to extend valve and cylinder life.
Choose this 1/2in port configuration when a mid-sized line needs robust preparation without an installed pressure dial. The metal bowl offers durability where impacts might occur, and the 40 um element suits general plant air. If the application requires instrumentation-grade purity, step up to the 5 um W element variant. For unattended wet lines, consider an automatic drain instead of this semi-auto and manual pair. Remember that oil mist is added downstream; choose a separate filter-regulator if the line must remain strictly oil-free. The three units are separately orderable as GAF400-15, GAR400-15 and GAL400-15, meaning a clogged element does not require replacing the whole assembly.
When sizing between bodies, the catalogue flow curve for the GAC400 is plotted to 6000 L/min at 0.7 MPa inlet, which is exactly double the 3000 L/min envelope of the smaller GAC300. Additionally, the 1.5 MPa (215 psi) proof pressure against the 1.0 MPa maximum provides a 1.5x burst-test margin, confirming structural integrity without permitting operation above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type F.R.L. combination operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 1/2in port, a 40 um element, a metal bowl, and a semi-auto+manual drain. The drain bowl capacity is 100 cc and the oil bowl is 185 cc. The unit weighs 2390 g, runs on air from -5 to 70 C, and uses ISO VG 32 lubricant.
The N in the ordering code indicates no gauge is supplied. The body features a 1/4in gauge connection, allowing operators to install a compatible NPT-thread gauge reading in MPa/psi if they need to visually monitor the downstream pressure setting.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.