
The AirTAC GAC F.R.L. Unit GAC500N20ASNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This GAC500 unit combines a filter, regulator and lubricator into a single pre-assembled line, with the three stages mounted on one L-shape bracket using quick clamps. The 3/4in port and 2460 g mass place it in the mid-large size class, suited to feeding a machine header rather than a single actuator. Air passes through the 5 um filter element, then the regulator holding 0.15-0.9 MPa (20-130 psi), and finally the lubricator adds oil mist downstream of the regulator so the oil never reaches the regulator seat.
The nylon bowl is a build choice for environments where a transparent polycarbonate bowl is not preferred, though the common specification of 1.0 MPa (145 psi) maximum pressure and -5 to 70 C temperature range applies regardless of bowl material. With no gauge supplied, the set pressure cannot be read directly on the unit; the 1/4in gauge connection allows a gauge to be added later if needed. The automatic drain clears condensate from the 108 cc bowl without operator intervention, which suits installations where regular manual draining would be overlooked. Order code GAC500N20ASNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC500N20ASNWT |
|---|---|
| Series | GAC500 F.R.L. combination |
| Port size | 3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 108 cc |
| Capacity of oil bowl | 225 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2460 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC500 is 1/4" if you add one.
| GAC500 | GA500 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 20 | Port size 3/4". This body offers 20 = 3/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF500-20 filter, GAR500-20 regulator, GAL500-20 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC500 · 3/4" · curve to 7000 L/min |
|---|---|
| One size down | GAC400 |
| One size up | GAC600 (curve to 12000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feed a 3/4in header supplying multiple pneumatic actuators on a CNC machining center, where the 5 um element protects precision solenoid valves from fine wear particles.
Condition air for a multi-station assembly conveyor where the automatic drain prevents water carryover into downstream cylinders and the lubricator maintains a consistent oil mist for moving parts.
Supply a carton erector or case packer with cleaned, regulated and lubricated air, with the 108 cc bowl and auto drain reducing maintenance stops on a high-cycling line.
Choose this GAC500N20ASNWT when the line needs 3/4in ports and the 2460 g weight of the unit can be supported by a panel or frame rather than the tubing. The automatic drain is the right call for unattended operation or wet compressed air, and the 5 um element traps finer particles than the standard 40 um grade for downstream precision valves, though it will need more frequent servicing. The nylon bowl is selected here; confirm it suits the surrounding environment, as the catalogue does not publish chemical or impact data for bowl materials. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Replacement units are separately orderable as GAF500-20, GAR500-20 and GAL500-20, so a clogged element does not mean replacing the whole assembly. The 108 cc condensate bowl of this GAC500 holds about 4.3x the condensate of a GAC300's 60 cc bowl, so the larger body needs far less frequent attention.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This F.R.L. combination operates over 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C and the recommended lubricant is ISO VG 32. The drain bowl holds 108 cc and the oil bowl holds 225 cc. The unit weighs 2460 g and has a 3/4in port.
The N after the port code means no pressure gauge is supplied with the unit. The gauge connection on the GAC500 is 1/4in, so a gauge can be added later if you need to read the set pressure directly on the regulator. The NPT thread on this model would use a gauge with an MPa/psi scale.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.