
The AirTAC GAC F.R.L. Unit GAC500N20LNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for demanding pneumatics, this AirTAC F.R.L. combination pre-plumbs a filter, regulator and lubricator on a single L-shape bracket. The 3/4in port serves the GAC500 body, and the 5 um element traps fine particulate for sensitive downstream valves. Because the lubricator sits last in the chain, oil mist is introduced downstream of the regulator seat, preventing fouling.
This lower-pressure type (L) governs output from 0.15-0.4 MPa (20-58 psi), while the 2460 g mass requires a rigid frame mount rather than tubing support. The nylon bowl equips this unit, and no gauge is supplied; install one later in the 1/4in connection port. Condensate empties through the semi-auto and manual drain pair into the 108 cc bowl, and the 225 cc oil reservoir sets the lubricant top-up interval. Order code GAC500N20LNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC500N20LNWT |
|---|---|
| Series | GAC500 F.R.L. combination |
| Port size | 3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 108 cc |
| Capacity of oil bowl | 225 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2460 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC500 is 1/4" if you add one.
| GAC500 | GA500 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 20 | Port size 3/4". This body offers 20 = 3/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF500-20 filter, GAR500-20 regulator, GAL500-20 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC500 · 3/4" · curve to 7000 L/min |
|---|---|
| One size down | GAC400 |
| One size up | GAC600 (curve to 12000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air to loom actuators where delicate fabric handling demands a regulated 0.4 MPa ceiling and fine 5 um particulate capture.
Supplies steady lubricated air to folding cylinders on automated packaging lines, using the 225 cc oil bowl to extend maintenance intervals.
Conditions air for sensitive test fixtures requiring lower pressure ranges, benefiting from the 5 um element to protect precision valves.
Choose this GAC500 unit for 3/4in lines needing fine 5 um filtration and a low 0.15-0.4 MPa (20-58 psi) ceiling; if a machine might ever exceed 0.4 MPa, pick the Standard type instead. The nylon bowl suits standard environments, but confirm compatibility for aggressive surroundings. Since no gauge is fitted, the set pressure cannot be read without adding one to the 1/4in connection. If the line must stay oil-free, choose a filter-regulator and omit the lubricator. Spares share the 500-20 suffix: GAF500-20, GAR500-20, GAL500-20. The catalogue flow curve for the GAC500 is plotted to 7000 L/min at 0.7 MPa inlet, which is 1.17x the GAC400's 6000 L/min envelope.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. The temperature range is -5 to 70 C. It features a 108 cc drain bowl, a 225 cc oil bowl, a 3/4in port, and weighs 2460 g. Use ISO VG 32 lubricant.
The N in the ordering code indicates no gauge is supplied. To read the set pressure, an operator must add a circular gauge to the 1/4in gauge connection on the body, with the default NPT thread reading in MPa/psi.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.