
The AirTAC GAC F.R.L. Unit GAC500N20LT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for mid-to-large pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 3/4in port serves machines needing substantial air volume, while the 40 um element captures solid particles before they reach downstream valves. A nylon bowl equips this assembly, and the lower pressure type restricts the operating band to 0.15-0.4 MPa (20-58 psi).
Air travels through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat stays clean. Weighing 2460 g, the body requires a firm panel or frame mount rather than tubing support. The 108 cc condensate bowl and 225 cc oil sump dictate the maintenance rhythm, and the fitted circular gauge reads MPa/psi for the default NPT thread. Order code GAC500N20LT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC500N20LT |
|---|---|
| Series | GAC500 F.R.L. combination |
| Port size | 3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 108 cc |
| Capacity of oil bowl | 225 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2460 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC500 | GA500 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 20 | Port size 3/4". This body offers 20 = 3/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF500-20 filter, GAR500-20 regulator, GAL500-20 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC500 · 3/4" · curve to 7000 L/min |
|---|---|
| One size down | GAC400 |
| One size up | GAC600 (curve to 12000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air looms and spinning frames where delicate yarn handling demands a strict 0.15-0.4 MPa operating band.
Supplies oil-misted air to the large-bore actuators folding and sealing corrugated boxes at a steady, regulated pressure.
Conditions air for high-cycle diverter gates on 3/4in distribution lines, preventing particulate ingress into sliding spool valves.
Choose this lower-pressure configuration when your equipment strictly operates within a 0.15-0.4 MPa band, as the internal spring is optimized for that narrow range rather than the standard 0.9 MPa ceiling. The nylon bowl offers a distinct build alternative to the standard PC or metal options, though buyers must confirm chemical compatibility for aggressive environments. If the downstream line must remain completely oil-free, omit the lubricator and select a dedicated filter-regulator instead. For maintenance, the assembly accepts individual GAF500-20, GAR500-20 and GAL500-20 replacement units. Stepping down to the GAC400 body drops the plotted flow envelope from 7000 L/min to 6000 L/min at 0.7 MPa inlet, whereas moving up to the GAC600 provides a 12000 L/min envelope. Because the L type tops out at 0.4 MPa, it provides only 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, features a 40 um element, and includes a 108 cc drain bowl alongside a 225 cc oil bowl. The assembly weighs 2460 g and uses ISO VG 32 lubricant.
This specific configuration ships with both a semi-auto and a manual drain fitted to the 108 cc condensate sump. The semi-auto mechanism expels liquid on each pressure drop when the system vents, while the manual option allows operators to dump accumulated water on demand between cycles.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.