
The AirTAC GAC F.R.L. Unit GAC500N20SNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for demanding pneumatics, this GAC500N20SNTK combines a filter, regulator and lubricator on a single L-shape bracket with quick clamps. The 3/4in port serves high-flow duties, and the standard type regulates from 0.15-0.9 MPa (20-130 psi). It uses a 40 um element and a nylon bowl, weighing 2460 g.
Air passes through the filter first, then the regulator, with oil mist added last so the regulator seat stays clean. The reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue. No gauge is supplied, but a 1/4in gauge connection allows adding one to read the set pressure. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC500N20SNTK |
|---|---|
| Series | GAC500 F.R.L. combination |
| Port size | 3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 108 cc |
| Capacity of oil bowl | 225 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2460 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC500 is 1/4" if you add one.
| GAC500 | GA500 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 20 | Port size 3/4". This body offers 20 = 3/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF500-20 filter, GAR500-20 regulator, GAL500-20 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC500 · 3/4" · curve to 7000 L/min |
|---|---|
| One size down | GAC400 |
| One size up | GAC600 (curve to 12000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds main air headers for robotic welding cells and large stamping presses requiring steady 3/4in supply lines.
Conditions air for heavy-duty case erectors and pallet wrappers where high flow sustains multiple large bore actuators.
Prepares air for dense transfer networks powering high-speed sortation diverters and pneumatic stops.
Choose this 3/4in body for heavy flows; the catalogue curve is plotted to 7000 L/min at 0.7 MPa inlet, whereas the GAC400 reaches 6000 L/min. The nylon bowl suits standard -5 to 70 C environments. The semi-auto and manual drains both ship fitted. If the line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares are GAF500-20, GAR500-20 and GAL500-20. The 1.5 MPa proof pressure against the 1.0 MPa maximum provides a 1.5x burst-test margin, not permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and proof of 1.5 MPa (215 psi). Temperature is -5 to 70 C. It has a 108 cc drain bowl, 225 cc oil bowl, uses ISO VG 32 lubricant, and weighs 2460 g.
The N in the code means no gauge is supplied. The body features a 1/4in gauge connection, so you can install your own gauge to monitor the 0.15-0.9 MPa range. The default NPT thread dictates an MPa/psi scale if a gauge is added.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.