
The AirTAC GAC F.R.L. Unit GAC600C20SNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for heavy pneumatic lines, this GAC600C20SNTK assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/4in port pairs with a 4600 g mass, dictating a firm panel or frame mount rather than tubing support. Air passes through the 40 um filter first, then the regulator sets a 0.15-0.9 MPa (20-130 psi) output, and oil mist is injected last so the regulator seat stays clean.
This variant uses a durable metal bowl fitted with both semi-auto and manual drains, giving operators two ways to clear the 205 cc condensate sump. No gauge is supplied, but a 1/4in connection allows adding one later to read the set pressure. The reverse-flow valve is fitted, shown as a separate pneumatic symbol in the catalogue. If the downstream line requires air without oil, omit the lubricator and choose a filter-regulator instead. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC600C20SNTK |
|---|---|
| Series | GAC600 F.R.L. combination |
| Port size | 3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 205 cc |
| Capacity of oil bowl | 410 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 4600 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC600 is 1/4" if you add one.
| GAC600 | GA600 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: Metal (C) only. |
| 20 | Port size 3/4". This body offers 20 = 3/4", 25 = 1". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) only. |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF600-20 filter, GAR600-20 regulator, GAL600-20 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC600 · 3/4" · curve to 12000 L/min |
|---|---|
| One size down | GAC500 |
| Build order | Filter → bracket → regulator → lubricator |
Feeds a multi-station machine header where a 3/4in port handles high air volume for concurrent pneumatic wrenches and actuators.
Conditions air for large bore cylinders, relying on the 4600 g frame-mounted assembly to supply a steady 0.15-0.9 MPa output.
Prepares air for heavy-load grippers and lifts, using the 40 um element to protect valves from line debris.
Choose this 3/4in body for large flow demands, noting the catalogue flow curve is plotted to 12000 L/min at 0.7 MPa inlet, whereas the smaller GAC500 peaks at 7000 L/min. The 410 cc oil bowl minimizes refill trips compared to smaller classes. Spares share the 600-20 suffix: order GAF600-20, GAR600-20 and GAL600-20 individually. Stepping up from the GAC500 gives roughly 1.7x the flow envelope.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 4600 g, has a 205 cc drain bowl, a 410 cc oil bowl, and uses ISO VG 32 lubricant.
The N after the port means no gauge is supplied, though a 1/4in connection exists to fit one. The K indicates a reverse-flow valve is fitted, which the catalogue details on its own page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.