
The AirTAC GAC F.R.L. Unit GAC600C25ASTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air straight to a machine header, the GAC600C25ASTK is a complete F.R.L. combination built around a 1" port. The standard pressure type governs a 0.15-0.9 MPa (20-130 psi) operating band, while the 40 um filter element captures solid grain before it reaches downstream valves. Because the lubricator sits last in the sequence, oil mist is injected downstream of the regulator seat, preventing fouling of the internal pressure-control mechanism.
Weighing 4600 g, this assembly demands rigid panel or frame mounting rather than tubing support. The metal bowl equips this 1" unit for demanding industrial environments, and the automatic drain empties the 205 cc condensate sump without an operator present. A circular gauge is fitted, reading MPa/psi for the default NPT thread, and the catalogue flow curve for the GAC600 is plotted to 12000 L/min at 0.7 MPa inlet.
| Model | Airtac GAC F.R.L. Unit GAC600C25ASTK |
|---|---|
| Series | GAC600 F.R.L. combination |
| Port size | 1" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 205 cc |
| Capacity of oil bowl | 410 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 4600 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC600 | GA600 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: Metal (C) only. |
| 25 | Port size 1". This body offers 20 = 3/4", 25 = 1". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) only. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF600-25 filter, GAR600-25 regulator, GAL600-25 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC600 · 1" · curve to 12000 L/min |
|---|---|
| One size down | GAC500 |
| Build order | Filter → bracket → regulator → lubricator |
Feeds a multi-station manufacturing header where a 1" port and high flow capacity are required to supply dozens of pneumatic actuators simultaneously.
Conditions air for heavy-duty filling and capping machinery, relying on the automatic drain to handle large volumes of condensate during continuous shifts.
Protects precision tooling and air bearings from particulate ingress while delivering a steady oil mist to heavy linear guides and pneumatic clamps.
Selecting this 1" body places you at the top of the GAC size range, with a flow envelope plotted to 12000 L/min at 0.7 MPa inlet compared to the 7000 L/min ceiling of the neighbouring GAC500. The 205 cc drain bowl and 410 cc oil bowl drastically cut intervention frequency versus smaller frames, while the fitted automatic drain removes the need for manual condensate dumps on wet lines. If the downstream process requires strictly oil-free air, this lubricator must be omitted entirely in favour of a dedicated filter-regulator. The three constituent modules are separately orderable as GAF600-25, GAR600-25 and GAL600-25, meaning a clogged element or damaged bowl does not force replacing the whole assembly. This variant includes a reverse-flow (reflux) valve, shown as a separate pneumatic symbol in the catalogue, and the 1.5 MPa (215 psi) proof pressure against the 1.0 MPa (145 psi) maximum provides a 1.5x burst-test margin.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 4600 g, features a 205 cc drain bowl and a 410 cc oil bowl, and recommends ISO VG 32 lubricant.
The K indicates that a reverse-flow (reflux) valve is attached to the unit. The catalogue depicts this as a separate pneumatic symbol on its own page, and no functional details are provided in the standard specification table.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.