
The AirTAC GAC F.R.L. Unit GAC600C25SNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for heavy-duty pneumatics, this AirTAC GAC600C25SNT F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1in port pairs with a 4600 g mass, establishing this as the largest size class in the series, suited for high-demand machine headers. It operates at 0.15-0.9 MPa (20-130 psi) and uses a 40 um element to capture solid grain.
The metal bowl equips this unit for rugged environments, while the semi-auto and manual drain pair provides flexible condensate management. Because no gauge is supplied, the set pressure cannot be read without adding one to the 1/4in gauge connection. Oil mist is introduced downstream of the regulator to prevent seat fouling, and the assembly carries a 1.0 MPa (145 psi) max pressure with a 1.5 MPa (215 psi) proof rating. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC600C25SNT |
|---|---|
| Series | GAC600 F.R.L. combination |
| Port size | 1" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 205 cc |
| Capacity of oil bowl | 410 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 4600 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC600 is 1/4" if you add one.
| GAC600 | GA600 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: Metal (C) only. |
| 25 | Port size 1". This body offers 20 = 3/4", 25 = 1". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) only. |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF600-25 filter, GAR600-25 regulator, GAL600-25 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC600 · 1" · curve to 12000 L/min |
|---|---|
| One size down | GAC500 |
| Build order | Filter → bracket → regulator → lubricator |
Feeds a primary 1in distribution manifold supplying multiple pneumatic wrenches and lifts with conditioned, oil-misted air.
Prepares bulk air for large filling stations where consistent pressure and lubrication protect high-cycle pneumatic grippers.
Regulates supply for massive pneumatic clamps and actuators, utilizing the 4600 g frame-mounted assembly for stable heavy-duty operation.
Choose this GAC600 body for large-scale air preparation, as its 12000 L/min plotted flow envelope at 0.7 MPa inlet dwarfs the 7000 L/min curve of the GAC500. The 205 cc condensate bowl and 410 cc oil reservoir minimize maintenance interventions. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. Spares follow the GAF600-25, GAR600-25 and GAL600-25 part numbers.
The 1.5 MPa proof pressure provides a 1.5x burst-test margin over the 1.0 MPa maximum, but this is not permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates 0.15-0.9 MPa (20-130 psi) with a 1.0 MPa (145 psi) max pressure and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, uses a 40 um element, and weighs 4600 g. The drain bowl holds 205 cc, the oil bowl holds 410 cc, and the recommended lubricant is ISO VG 32.
No, the N in the code means no gauge is supplied. To monitor the set pressure, you must add a circular gauge to the 1/4in gauge connection on the body. The default NPT thread sets the expected gauge scale to MPa/psi.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.