verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF300 · Air Filter (water separation + particulate filtration)

Airtac GF Air Filters (G) GF30008T

The AirTAC GF Air Filters (G) GF30008T is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT1/4" ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT1/4"
  • Filtering grade40 µm
  • DrainDifferential-pressure drain
  • Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
  • Bowl materialPC
  • ThreadNPT
  • BracketMounting bracket included
$37.54 $45.04Save 16% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF300 stroke, mounting and version on one page All GF300 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GF Air Filters (G) GF30008T

The GF30008T is an AirTAC GF300 air filter, a filtration-only unit that removes water and particulate from compressed air. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and the polycarbonate bowl carries a mounting bracket as standard.

This is a genuine AirTAC part. The GF family is available in sizes 200, 300, 400 and 600 with a choice of ports, three thread types (NPT on this code), manual, automatic or differential-pressure drains, and an optional 5 um element (code W) in place of the standard 40 um. Flow is published only as catalogue curves rather than a single rated figure, so we confirm the datasheet and flow figures for your application on request.

Airtac GF Air Filters (G) GF30008T Technical Specifications

ModelAirtac GF Air Filters (G) GF30008T
SeriesGF300 air filter
Port sizePT1/4" (NPT thread)
Filtering grade40 µm
Drain typeDifferential-pressure drain
BracketMounting bracket included
FluidCompressed air
Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialPC
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: Airtac GF Air Filters (G) GF30008T

GF300G-series air filter, 300 body — sets the port range.
08Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
(blank)Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M).
(blank)Mounting bracket included. A bracket ships by default; J orders it without.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF300 · PT1/4" · 40 µm
One size downGF200
One size upGF400
Line orderFilter first, then regulator, then lubricator

Where the Airtac GF Air Filters (G) GF30008T Is Used

precision_manufacturing

CNC machine tool air supply

Installed on the compressed air drop feeding a CNC machining centre, it strips water and pipe-scale from the supply line before air reaches the machine's pneumatic valves and tool-clamp circuit. The differential-pressure drain keeps condensate moving without daily manual blowing down.

conveyor_belt

Packaging line cylinder supply

Mounted ahead of the valve manifold on a carton-sealing or case-packing conveyor, it removes moisture and debris that would otherwise score cylinder bores and stick spool valves during multi-shift running.

build

Workshop air-drop protection

Fitted at the point where a workshop ring main drops to individual air-tool stations, it keeps rust particles and accumulated water out of impact wrenches, grinders and blow guns, with the bracket holding the unit secure at the bench.

Is the Airtac GF Air Filters (G) GF30008T the Right Filter?

Choose the GF size and port by stepping up from 200 to 600 as your air demand grows - the 300 size with a 1/4 in port suits general machine and tool supply lines. Decide the drain first: differential-pressure (this unit) needs no attention at normal duty, automatic (code A) suits unattended installations, and manual (code M) gives operator control. Keep the standard 40 um element for general air prep, or specify W for 5 um where finer protection is needed. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 40 µm element when pressure loss rises.

The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

Airtac GF Air Filters (G) GF30008T FAQ

AirTAC publishes filter flow only as pressure-drop curves, not as a single rated number, so we do not quote a figure here. Tell us your line pressure and air demand and we will confirm the flow and datasheet figures for the GF300 at 1/4 in on request before you order.

The standard differential-pressure drain releases collected condensate automatically when the pressure difference across the 40 um element builds up, so it suits normal duty with steady air supply. Choose code A for fully automatic draining in unattended installations, or code M for manual draining where an operator blows the bowl down as part of a routine.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GF Air Filters (G) GF30008T

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF30008T and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.