verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF400 · Air Filter (water separation + particulate filtration)

AirTAC GF400-15 Filter (GF40015AJT)

The AirTAC GF400-15 Filter (GF40015AJT) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT1/2" ports and a automatic drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT1/2"
  • Filtering grade40 µm
  • DrainAutomatic drain
  • Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
  • Bowl materialPC
  • ThreadNPT
  • BracketSupplied without bracket
$55.49 $62.99Save 11% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF400 stroke, mounting and version on one page All GF400 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GF400-15 Filter (GF40015AJT)

The GF40015AJT is an AirTAC G-series air filter for water and particulate removal only - there is no regulator and no lubricator in this family. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The J suffix means no mounting bracket is supplied, so the unit suits installations where it is panel-mounted by your own arrangement or inline where a bracket is not wanted. The bowl is polycarbonate at 400 size.

This is a genuine AirTAC part. The GF family is available in sizes 200, 300, 400 and 600, with differential-pressure, automatic or manual drains, 40 um or 5 um elements, and three thread types (NPT on this code) as catalogue options. We provide datasheet and flow-curve confirmation on request, since flow is published as curves rather than a single rated figure.

AirTAC GF400-15 Filter (GF40015AJT) Technical Specifications

ModelAirTAC GF400-15 Filter (GF40015AJT)
SeriesGF400 air filter
Port sizePT1/2" (NPT thread)
Filtering grade40 µm
Drain typeAutomatic drain
BracketSupplied without bracket
FluidCompressed air
Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialPC
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GF400-15 Filter (GF40015AJT)

GF400G-series air filter, 400 body — sets the port range.
15Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2".
ADrain: Automatic drain. Options are differential (blank), automatic (A) or manual (M).
JSupplied without bracket. A bracket ships by default; J orders it without.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF400 · PT1/2" · 40 µm
One size downGF300
One size upGF600
Line orderFilter first, then regulator, then lubricator

Where the AirTAC GF400-15 Filter (GF40015AJT) Is Used

handyman

Maintenance-shop air drop

Inline filter on the 1/2 in drop feeding pneumatic wrenches and presses in a plant maintenance shop, with the automatic drain handling condensate.

science

Lab pneumatic supply

Cleans the compressed air serving bench-top test rigs in a materials lab, where the no-bracket body is fitted directly into the supply run.

air

Air-knife blowoff line

Filters the 1/2 in supply ahead of air-knife blowoff nozzles on a bottle-drying conveyor, keeping water out of the drying air.

Is the AirTAC GF400-15 Filter (GF40015AJT) the Right Filter?

Decode summary: 400 size, NPT 1/2 in port, automatic drain, 40 um element, bracket omitted (J). Choose this over the bracketed GF40015A when your mounting method does not need the included bracket. Step to the 600 size at a larger port if the 400 frame is too small for the line; size 200 or 300 serves lighter circuits. For finer air, the W version of this exact configuration carries the 5 um element; manual and differential-pressure drains are also orderable at this size. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

Rated flow is not published as a single number for this family - it appears as curves - so ask us to confirm sizing and share the datasheet before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 40 µm element when pressure loss rises.

The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

AirTAC GF400-15 Filter (GF40015AJT) FAQ

We do not quote a single rated-flow figure because AirTAC publishes flow for the GF400 series as performance curves. Give us your line flow and pressure and we will confirm the sizing from the datasheet on request.

J means no mounting bracket is included; the blank position would supply one. It is a pure mounting choice - the filtration function, NPT 1/2 in port, automatic drain and 40 um element are identical to the bracketed GF40015A.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GF400-15 Filter (GF40015AJT)

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF40015AJT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.