
The AirTAC GF400-15 Filter (GF40015AWT) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 5 µm element, with PT1/2" ports and a automatic drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
The GF40015AWT is an AirTAC G-series air filter: it removes water and particulate from compressed air only - no pressure regulation, no lubrication. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The 400-size polycarbonate bowl is rated for a maximum inlet pressure of 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and since no J appears in the code a mounting bracket is included. AirTAC lists the GF filter as having low pressure drop.
This is a genuine AirTAC G-series part. The GF family spans the 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, differential-pressure, automatic or manual drain choices, 40 um standard or 5 um elements, and G (BSPP) or NPT thread options to order. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and flow figures for your application on request.
| Model | AirTAC GF400-15 Filter (GF40015AWT) |
|---|---|
| Series | GF400 air filter |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Drain type | Automatic drain |
| Bracket | Mounting bracket included |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | PC |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GF400 | G-series air filter, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain. Options are differential (blank), automatic (A) or manual (M). |
| (blank) | Mounting bracket included. A bracket ships by default; J orders it without. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF400 · PT1/2" · 5 µm |
|---|---|
| One size down | GF300 |
| One size up | GF600 |
| Line order | Filter first, then regulator, then lubricator |
Installed on the supply to a bottling line's valve manifold, the 5 um element keeps water and fines out of the pilot valves, and the automatic drain plus included bracket make it a fit-and-forget point-of-use station.
Mounted on the frame of a pick-and-place robot cell with the supplied bracket, the filter feeds the gripper circuit with 5 um-filtered air while the automatic drain handles condensate through long production runs.
Placed ahead of air-knife nozzles on a washdown drying station, the 5 um grade and automatic condensate drain help keep the nozzle array clear of water and particulate carryover from the shop main.
Size the unit to the pipe and duty: the 400 frame with its 1/2 in NPT port sits mid-range, and the 600 size steps up to a larger port and more flow if the line needs it. This code pairs the automatic drain - best where nobody is routinely checking the bowl - with the 5 um (W) element for finer filtration than the standard 40 um grade. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. AirTAC publishes flow as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
There is no single rated flow to quote - AirTAC publishes this filter's performance as flow curves only. Tell us your working pressure and air consumption and we will confirm the datasheet curve for this 400-size, 1/2 in NPT unit against your application on request.
The A selects the automatic drain instead of the differential-pressure default, so condensate is expelled without an operator. The W fits the optional 5 um element in place of the standard 40 um grade, and the absence of a J code means the mounting bracket is included. The 1/2 in NPT port, 400 frame and 1.0 MPa (145 psi) maximum inlet pressure stay the same.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.