verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF400 · Air Filter (water separation + particulate filtration)

AirTAC GF400-15 Filter (GF40015MJT)

The AirTAC GF400-15 Filter (GF40015MJT) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT1/2" ports and a manual drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT1/2"
  • Filtering grade40 µm
  • DrainManual drain
  • Inlet pressure0 - 0.9 MPa (0 - 131 psi)
  • Bowl materialPC
  • ThreadNPT
  • BracketSupplied without bracket
$41.79 $49.29Save 15% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF400 stroke, mounting and version on one page All GF400 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GF400-15 Filter (GF40015MJT)

The AirTAC GF40015MJT is a G-series air filter for compressed air only: it strips water and particulate from the line, with no pressure regulation and no lubrication. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The J in the code means no mounting bracket is supplied, so the body is plumbed directly without bracket mounting. Drainage is manual: condensate in the PC bowl is emptied by hand, and with a manual drain the maximum working pressure is 0.9 MPa (130 psi). Working temperature range is -5 to 70 C.

This is a genuine AirTAC part from the G series, available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in. Drain type, a 5 um element, G or NPT threads and bracket options can be specified. Flow is published as curves rather than a single rating, so we will confirm the datasheet figures on request.

AirTAC GF400-15 Filter (GF40015MJT) Technical Specifications

ModelAirTAC GF400-15 Filter (GF40015MJT)
SeriesGF400 air filter
Port sizePT1/2" (NPT thread)
Filtering grade40 µm
Drain typeManual drain
BracketSupplied without bracket
FluidCompressed air
Inlet pressure0 - 0.9 MPa (0 - 131 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialPC
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GF400-15 Filter (GF40015MJT)

GF400G-series air filter, 400 body — sets the port range.
15Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2".
MDrain: Manual drain. Options are differential (blank), automatic (A) or manual (M).
JSupplied without bracket. A bracket ships by default; J orders it without.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF400 · PT1/2" · 40 µm
One size downGF300
One size upGF600
Line orderFilter first, then regulator, then lubricator

Where the AirTAC GF400-15 Filter (GF40015MJT) Is Used

precision_manufacturing

CNC spindle-air feed

Inline filtration of the air feed to a CNC machining centre's pneumatic tool-change circuit, plumbed straight into the existing manifold without a bracket.

view_module

Palletiser valve island

Point-of-use filter ahead of the valve island on a palletising line, where the 1/2 in supply matches the main feeder and the bracketless body mounts on the pipe run.

science

Lab air ring main

Removing line moisture and debris from a laboratory compressed-air ring main before it reaches benchtop equipment, with manual draining during scheduled maintenance.

Is the AirTAC GF400-15 Filter (GF40015MJT) the Right Filter?

The 400 size with a 1/2 in NPT port suits mid-to-large machine supplies; step down to 200/300 (1/8 to 3/8 in) for smaller lines or up to 600 for bulk plant air. The bracketless J configuration is intended where the filter hangs on the pipework itself or mounts in your own fixture; order the bracketed version if you want a panel or wall fixing. Drain choice is manual here, best where the bowl can be bled routinely, with automatic and differential-pressure variants for unattended points. Stay with the 40 um element for general protection or pick the W variant for 5 um. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is given as curves, not a single rating, so ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0 - 0.9 MPa (0 - 131 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 40 µm element when pressure loss rises.

The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

AirTAC GF400-15 Filter (GF40015MJT) FAQ

AirTAC publishes filter flow as curves, not as a single rated figure, so we do not quote one l/min or SCFM value. Send us your line pressure and air consumption and we will confirm the flow-curve data from the datasheet for this model on request.

J selects the no-bracket configuration: the filter body is supplied without a mounting bracket, for direct pipework or fixture mounting. The same filter is available with a bracket included as GF40015M. Everything else - 1/2 in NPT port, manual drain, 40 um element - is identical.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GF400-15 Filter (GF40015MJT)

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF40015MJT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.