verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC200 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC200-06 Combination Unit (GFC20006MC1TK)

The AirTAC GFC200-06 Combination Unit (GFC20006MC1TK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/8" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT1/8"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade40 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$74.53 $82.03Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC200-06 drain, gauge and thread option on one page All GFC200-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC200-06 Combination Unit (GFC20006MC1TK)

GFC20006MC1TK is a genuine AirTAC G-series two-unit air treatment set: a filter regulator plus a lubricator for size 200 pipework on NPT1/8 (1/8 in) ports, with a reverse/check valve fitted so downstream pressure is held if the upstream supply drops. The filter section uses the standard 40 um element with a manual drain; the regulator adjustment range is 0.05-0.9 MPa (7-130 psi); the lubricator meters oil mist to the downstream equipment. Maximum working pressure is 1.0 MPa (145 psi), the temperature range is -5 to 70 C, and at this size both bowls are polycarbonate. A round external pressure gauge on the MPa scale is included.

This is a genuine AirTAC part from the G series, which spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in and thread options three thread types (NPT on this code). The same set is available without the check valve, with a 5 um element, and with alternative drain, gauge and thread options. Flow for the G series is published as curves rather than a single rating, so we confirm sizing and full datasheet figures on request.

AirTAC GFC200-06 Combination Unit (GFC20006MC1TK) Technical Specifications

ModelAirTAC GFC200-06 Combination Unit (GFC20006MC1TK)
SeriesGFC200 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT1/8" (NPT thread)
Filtering grade40 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — round, MPa scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC200-06 Combination Unit (GFC20006MC1TK)

GFC200G-series two-unit set, 200 body — sets the port range.
06Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-06 filter regulator and GL200-06 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC200 · PT1/8" · 40 µm
One size upGFC300
Three-unit equivalentGC200-06
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC200-06 Combination Unit (GFC20006MC1TK) Is Used

handyman

Vehicle service bay impact tool stations

Drops feeding impact wrenches and air ratchets at a workshop bench: the set filters shop air, holds steady tool pressure, feeds oil mist, and the check valve keeps the tools charged if supply dips.

bolt

Pneumatic torque tool cells

Dedicated supply to air-driven nutrunners and screwdrivers on a production cell, where steady regulated pressure and continuous lubrication protect the tools and the check valve preserves the set circuit between cycles.

valve

Pneumatic actuator valve skids

Conditioning the air supply to small quarter-turn actuators and pilot circuits on a valve skid, keeping the actuator supply pressurised through short upstream pressure losses thanks to the fitted check valve.

Is the AirTAC GFC200-06 Combination Unit (GFC20006MC1TK) the Right Set?

The K code adds a reverse/check valve to the set, useful when a dip in supply pressure must not vent the regulated downstream circuit. Size 200 with NPT1/8 ports is the smallest G-series step; move to 300, 400 or 600 for larger ports and more flow. Manual drain (M) means hand draining of the bowl and a regulator range of 0.05-0.9 MPa (7-130 psi). The 40 um element is the standard grade; the W variant carries a 5 um element for finer filtration. The gauge here is a round external type on the MPa scale; psi/bar scales and the embedded square gauge are catalogue alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-06 filter regulator on its own.

AirTAC GFC200-06 Combination Unit (GFC20006MC1TK) FAQ

AirTAC publishes G-series flow only as curves, not as a single rated number, so we do not state a figure here. Send us your application details and we will confirm the sizing and the full datasheet curve for this size 200 set with NPT1/8 ports on request.

The K code means a reverse/check valve is fitted, so downstream pressure is retained if the upstream supply falls. If you do not need that safeguard, the plain GFC20006MC1 is the same filter regulator and lubricator set without it.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC200-06 Combination Unit (GFC20006MC1TK)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC20006MC1TK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.