
The AirTAC GFC300-08 Combination Unit (GFC30008AF1TK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC30008AF1TK is a two-unit air-treatment set for compressed air: a filter regulator paired with a separate lubricator, covering filtration, pressure regulation and oil-mist lubrication at one station. The trailing K adds a reverse (check) valve, so downstream pressure is held if the upstream supply is lost. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. the 300-size bowls are polycarbonate (PC).
This is a genuine AirTAC part from the G series, spanning sizes 200 to 600, ports 1/8 to 1 inch and three thread types (NPT on this code). Maximum working pressure is 1.0 MPa (145 psi), the regulator adjusts 0.15-0.9 MPa (20-130 psi) on this automatic-drain version, and operating temperature is -5 to 70 C, non-freezing. Flow is published as curves, not a single rating, so we confirm the datasheet figures for your circuit on request.
| Model | AirTAC GFC300-08 Combination Unit (GFC30008AF1TK) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-08 filter regulator and GL300-08 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-08 |
| Build order | Filter regulator first, lubricator last |
Feeds the clamping cylinders of a pneumatic workholding press. The check valve keeps clamp pressure in the circuit while upstream air is being switched or serviced, so the workpiece stays gripped until the operator releases it.
Conditions the individual air drops of a robot assembly cell: filtered, regulated, lubricated air for grippers and screwdrivers, with the reverse valve holding cell pressure during planned upstream maintenance.
Supplies the doffing and yarn-threading cylinders on textile machinery, where continuous oil mist lubrication and a held downstream pressure protect cylinders from rust and stiction between production runs.
Choose this code over the plain GFC30008AF1 when a dropped or shut-off upstream supply must not vent your downstream circuit: the K option fits the reverse (check) valve at order time. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. A 5 um W-code version exists for finer filtration, and manual- or differential-drain variants cover other servicing styles. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-08 filter regulator on its own.
Start from the port and size: this unit is the 300 frame with a 1/4 inch NPT port, and the G series steps through 200, 400 and 600 for other ports and flow levels. We do not publish a single rated flow number because AirTAC gives the data as curves, so send us your working pressure and air demand and we will confirm the sizing from the datasheet on request.
K specifies a reverse (check) valve fitted to the unit. It lets air pass downstream in normal operation but blocks backflow, holding downstream pressure if the upstream supply is shut off or lost. The same unit without the K, GFC30008AF1, is identical in every other respect: filter regulator plus lubricator, 1/4 inch NPT port, automatic drain, 40 um element and square MPa gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.