
The AirTAC GFC300-08 Combination Unit (GFC30008AF3T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
GFC30008AF3T is a genuine AirTAC GFC two-unit air-preparation set for compressed air: a filter-regulator that removes water and particulate and holds downstream pressure, paired with a separate lubricator that adds oil mist for air tools and cylinders. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. It carries the embedded square pressure gauge scaled in bar.
You are buying a genuine AirTAC part from the G series, which spans 200, 300, 400 and 600 sizes with three thread types (NPT on this code), 40 um or 5 um filtration, automatic, manual or differential-pressure drains, and square or round gauges in MPa, psi or bar scales. The filter-regulator bowl on this 300 size is polycarbonate. Inlet pressure is rated to 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so send us your application and we will confirm sizing and datasheet figures on request.
| Model | AirTAC GFC300-08 Combination Unit (GFC30008AF3T) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-08 filter regulator and GL300-08 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-08 |
| Build order | Filter regulator first, lubricator last |
Supplies filtered, regulated, lubricated air to the tool-change cylinder and air-blast nozzle on a vertical machining center, with condensate drained automatically.
Prepares lubricated air for impact wrenches and nutrunners at an automotive sub-assembly bench while the regulator holds a steady set-point as tools cycle.
Conditions air for pneumatic pusher and diverter cylinders on a carton conveyor line, with the automatic drain handling moisture between shifts.
Step through the G series - 200, 300, 400 or 600 - to match the port size and flow your line needs; this is the 300 frame with 1/4 in ports. The automatic drain removes condensate without daily attention; manual and differential-pressure drains are the alternatives in the family. The 40 um element suits general plant air, and the W option gives 5 um where downstream valves need finer filtration. The embedded square gauge is scaled in bar here, with MPa or psi scales orderable. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options. Because published flow is a set of curves rather than one rated number, ask us to check the curves against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-08 filter regulator on its own.
AirTAC publishes flow for the GFC series as curves rather than a single rated figure, so we do not quote one number here. Send us your line pressure, port size and downstream demand and we will confirm the flow curve and full datasheet figures for this exact model on request.
F3 decodes as the embedded square pressure gauge scaled in bar. If your panel is read in MPa or psi, order the same set with a C1 (round, MPa) or C2 (round, psi) gauge code instead - the function, ports, drain and filter grade stay identical.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.