
The AirTAC GFC300-08 Combination Unit (GFC30008F3WTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC series is a two-unit air-preparation set: a filter-regulator plus a lubricator, so one assembly removes water and particulate, sets the working pressure and feeds oil mist to downstream equipment. This 300-size version is ported NPT1/4, uses the fine 5 um W filter element, drains its bowl on the differential-pressure principle, shows pressure on an embedded square gauge scaled in bar, and includes a reverse (check) valve fitted at the factory.
This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes with 1/8in to 1in ports; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves rather than a single rating, so we confirm sizing and datasheet figures on request. Order code GFC30008F3WTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GFC300-08 Combination Unit (GFC30008F3WTK) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-08 filter regulator and GL300-08 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/4" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-08 |
| Build order | Filter regulator first, lubricator last |
Conditioned air for mould-machine safety interlock and gate cylinders, with the reverse valve helping preserve the set pressure if the header dips.
A 1/4in prep point for machining-centre fixture clamps, where the 5 um element protects directional valves and the check valve guards clamp pressure between cycles.
Fine-filtered, regulated and lubricated air for test-handler actuation manifolds that must hold their set pressure through shop-air fluctuations.
Pick the port first: this 300 unit is NPT1/4, and the 200/400/600 sizes move the connection and flow capability up or down. The differential-pressure drain fitted here handles condensate during flow; automatic and manual drains are orderable options and set the regulator range (differential and auto: 0.15-0.9 MPa / 20-130 psi; manual: 0.05-0.9 MPa / 7-130 psi). The 5 um W element suits finer downstream components, where the standard 40 um element would serve general plant air.
The K in the code adds the reverse (check) valve - keep it where a brief upstream pressure loss must not dump the circuit downstream of the set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-08 filter regulator on its own.
Flow for the G series is published as curves, not as a single rated figure, so there is no one number to quote here. Send us your operating pressure and air demand and we will confirm the correct size from the datasheet curves on request before ordering.
K means a reverse (check) valve is fitted, so flow passes one way through the set and downstream pressure is not vented back if the upstream supply drops. The same set without the K code is identical but without that valve - choose based on whether your circuit needs to ride through supply dips.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.