
The AirTAC GFC300-08 Combination Unit (GFC30008MC1TK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GFC series is a two-unit air preparation set: a filter-regulator plus a lubricator supplied as a matched pair, so one order covers filtration, pressure regulation and oil-mist lubrication. This GFC30008MC1TK is the size 300 set with NPT1/4 ports, a manual drain on the filter-regulator bowl, the standard 40 um filter element, an external round gauge reading in MPa, and a built-in reverse (check) valve that holds downstream pressure when the upstream supply is removed. Maximum working pressure is 1.0 MPa (145 psi); with this manual-drain configuration the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi); operating temperature is -5 to 70 C (non-freezing). The bowls on this size 300 set are polycarbonate (PC).
This is a genuine AirTAC part for the US market. The GFC family is available in sizes 200, 300, 400 and 600 with ports from 1/8 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow for the G series is published as curves rather than one rated figure, so ask us and we will confirm the datasheet flow data for your application on request.
| Model | AirTAC GFC300-08 Combination Unit (GFC30008MC1TK) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-08 filter regulator and GL300-08 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-08 |
| Build order | Filter regulator first, lubricator last |
Mounted at the drop feeding a spray booth's air logic panel, this set removes water and particulate, holds a steady regulated pressure for the spray valves, and meters oil mist to keep the actuators moving smoothly through a full shift.
On a cartoner's pneumatic cylinders and glue-head valves, the filter-regulator cleans and stabilises the supply while the lubricator feeds the valve spools, and the check valve keeps the circuit charged during brief upstream interruptions.
Feeding the clamp cylinders on a machining centre fixture, the unit delivers filtered, regulated air at a set pressure with a visible gauge reading, while lubrication protects the clamping valves over repeated cycles.
Size 300 with 1/4 in. NPT ports is the mid step of the G-series range; match the port and size step to the flow your line needs, moving to size 400 (1/2 in. ports) if demand sits near the top of the size 300 curves. The manual drain here means an operator opens the bowl drain periodically - pick the automatic-drain version for unattended installations. Filtration is the standard 40 um element; add the W suffix for 5 um when downstream valves and cylinders need finer protection. The gauge is the external round type with an MPa scale (a psi scale is offered). This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. order G (BSPP) or NPT to match your piping, and choose the bracket option if you panel-mount. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-08 filter regulator on its own.
AirTAC publishes G-series flow as performance curves rather than a single rated number, so no rated flow figure is quoted here. Tell us your required flow and working pressure and we will confirm the datasheet curves for this 1/4 in. set against your application on request.
K means a reverse (check) valve is fitted to the filter-regulator section: if the upstream supply is shut off, the valve holds pressure downstream so regulated circuits and cylinders do not dump back toward the supply. Sets without the K are ordered without this function.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.