
The AirTAC GFC300-08 Combination Unit (GFC30008MLC1T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
This AirTAC GFC set combines a filter-regulator and a lubricator as a two-piece assembly, and the L in the code selects the low-pressure regulator type rather than the standard one - the choice for circuits that run at lower set pressures. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. A round external pressure gauge reading in MPa is fitted (C1); because this is the low-pressure type, tell us your set pressure and we will confirm the exact adjust range on request.
This is a genuine AirTAC part from the G series, offered in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in. At 300 size the bowls are polycarbonate and service is -5 to 70 C non-freezing. Flow is published as curves, not a single rated figure, so ask us to confirm capacity and the datasheet for your application. Order code GFC30008MLC1T has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GFC300-08 Combination Unit (GFC30008MLC1T) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-08 filter regulator and GL300-08 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-08 |
| Build order | Filter regulator first, lubricator last |
Prepares low-set-pressure air for cylinder-driven handling modules on a laboratory test bench, with pressure read on the round MPa gauge.
Feeds the nip and idler-roll cylinders of a small printing or converting machine where only gentle regulated pressure is wanted.
Filters, regulates and lubricates the air circuit ahead of a controlled low-pressure blowing or ejector station on a production line.
Choose the L code when the downstream circuit runs at low set pressures and the standard regulator type would sit at the bottom of its range; we will confirm the exact adjust range for your set point on request. Round external gauge (C) vs embedded square gauge (F), and MPa, psi or bar scale, are the next choices - this code is a round MPa gauge. Manual drain fits attended areas; automatic and differential-pressure codes serve unattended ones. The 40 um element is standard; the W code gives 5 um. Size 300 with a 1/4 in NPT port is the mid step - flow is only published as curves, so let us confirm sizing against the datasheet before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-08 filter regulator on its own.
AirTAC publishes flow for this series as characteristic curves rather than a single rated figure, so there is no honest one-line number. Give us your required flow and pressures and we will confirm the sizing against the datasheet on request before you order.
L selects the low-pressure regulator type instead of the standard one, intended for lower set pressures - send us your set point and we will confirm the exact adjust range on request. C1 means a round external pressure gauge with an MPa scale is fitted. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.