
The AirTAC GFC300-08 Combination Unit (GFC30008NTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC two-unit set combines a filter-regulator and a lubricator, so one assembly filters, regulates and oil-mist lubricates compressed air. This GFC30008NTK is built for 1/4 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. With differential-pressure drainage the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi).
It is a genuine AirTAC part, rated for compressed air at up to 1.0 MPa (145 psi) inlet and -5 to 70 C, non-freezing, with polycarbonate bowls at this 300 size. The GFC series spans sizes 200 to 600 with drain-type choices, a 5 um element option, gauge variants and G (BSPP) or NPT threads. Flow is published as curves rather than a single rating, so we confirm flow and datasheet figures on request.
| Model | AirTAC GFC300-08 Combination Unit (GFC30008NTK) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-08 filter regulator and GL300-08 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-08 |
| Build order | Filter regulator first, lubricator last |
A maintenance bench outlet for impact drivers and ratchets: filtered, regulated and lubricated air from one set, with the reverse-flow valve stopping hoses or tools pushing air back through the unit.
Feeding gripper cylinders on a robotic pick-and-place cell; regulation keeps the grip pressure steady at the set point and the check valve blocks backflow through the set.
A service rig supplying lubricated, regulated air for trailer door and suspension actuation checks, with the check valve preventing reverse flow between the rig and the vehicle line.
Pick the size step (200, 300, 400 or 600) against the port and air demand of the circuit; this set is size 300 with 1/4 in. NPT ports. Drain options are differential-pressure (this set, the default), automatic (A) or manual (M); filtration is the standard 40 um element, with 5 um as the W option; the K in this code adds the reverse-flow valve, useful on clamping or holding circuits where backflow must be prevented. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-08 filter regulator on its own.
AirTAC publishes G-series flow as curves in the datasheet rather than a single rated figure, so no rated number is quoted here. Tell us your inlet pressure and air demand and we will confirm the flow curve and sizing from the datasheet on request before you order.
K fits a reverse/check valve in the set. It blocks air from flowing backwards through the unit - for example if upstream supply drops or a downstream circuit pushes back - which suits clamping and holding circuits. Otherwise the decode matches the standard GFC30008: 1/4 in. NPT, differential-pressure drain and 40 um filtration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.