
The AirTAC GFC400-15 Combination Unit (GFC40015AF1WTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC40015AF1WTK is a two-unit air-treatment set pairing a filter regulator with a lubricator, fitted with a reverse (check) valve so downstream air is held when supply is lost. It is the 400 size with NPT1/2 ports, an automatic drain, a 5 um filter element, and an embedded square gauge scaled in MPa. The regulator adjusts from 0.15-0.9 MPa (20-130 psi) with the automatic drain, and maximum inlet pressure is 1.0 MPa (145 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the G series, offered in sizes 200 through 600 with G (BSPP) and NPT thread options, manual or differential-pressure drains, 40 um or 5 um elements, and gauge variations. Flow is published as curves rather than a single rating, so ask us and we will confirm the datasheet and sizing for your line on request.
| Model | AirTAC GFC400-15 Combination Unit (GFC40015AF1WTK) |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-15 filter regulator and GL400-15 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · PT1/2" · 5 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-15 |
| Build order | Filter regulator first, lubricator last |
Supplying conveyor gate and stopper cylinders where the check valve holds the set pressure if the shop-air supply drops, keeping the line position stable until air returns.
Serving impact wrenches and nutrunners at an assembly cell: the 5 um element, regulation and oil mist in one set, with the check valve guarding the tool circuit against backflow.
Conditioning air for filler and capper actuator circuits on a bottling line, where automatic condensate draining and 5 um filtration suit the fast-cycling pneumatic stations.
Choose this code over GFC40015AF1W when you want the reverse valve fitted: it holds set pressure downstream during supply interruptions, useful on circuits that must not collapse mid-cycle. Keep the automatic drain for unattended duty, the 5 um element for finer filtration than the 40 um standard, and the square MPa gauge for metric-specified panels. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options to order.
Flow appears in the catalogue as curves, not a single rating, so share your application conditions and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-15 filter regulator on its own.
AirTAC does not publish a single rated-flow figure for the G series; flow is given as performance curves. Send us your flow and pressure requirements and we will confirm the correct size from the datasheet on request before you order.
K specifies that a reverse (check) valve is fitted, so air does not flow back toward the supply side. The base GFC40015AF1W without the K is identical in size, drain, filter grade and gauge but has no check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.