
The AirTAC GFC400-15 Combination Unit (GFC40015ALNT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC series is a two-unit air-treatment set: a filter-regulator paired with a lubricator, so one assembly removes water and particulate, holds a set downstream pressure and meters oil mist into the air line. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. It is the low-pressure (L) type, intended for reduced outlet settings; confirm its exact low-pressure adjustment range with us on request.
This is a genuine AirTAC part. Maximum working pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing); the size 400 filter bowl is PC (polycarbonate). Across the G series you can step size and port from 200 to 600, choose differential-pressure, automatic or manual drains, order the 5 um (W) element instead of 40 um, add gauge and bracket options and select three thread types (NPT on this code). Flow for this size is published as curves rather than a single rated figure, so we confirm datasheet and sizing values on request. Order code GFC40015ALNT has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GFC400-15 Combination Unit (GFC40015ALNT) |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-15 filter regulator and GL400-15 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · PT1/2" · 40 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-15 |
| Build order | Filter regulator first, lubricator last |
Filtering, regulating and oil-misting the air feeding paint spray guns on a 1/2" manifold in an automotive refinish booth, with the low-pressure type set to gentle gun inlet pressures and the automatic drain clearing condensate between shifts.
Conditioning supply air on an air-jet weaving machine: the filter-regulator section removes water and particles and holds a reduced set pressure, while the lubricator meters oil mist to the loom's pneumatic cylinders and control valves.
Supplying pulsed air nozzles that blow dust off trays on a plant conveyor; the 1/2" NPT port feeds the nozzle bank and the automatic drain copes with condensate from a long compressed-air run.
Real choices in this family: step the size and port (200/300/400/600; here 400 with a NPT1/2 port) against the flow your line needs; pick the drain - this unit drains automatically, while differential-pressure (default) and manual drains are also available; choose the 40 um standard element or the 5 um (W) option; select thread three thread types (NPT on this code) orderable; and decide on a gauge, since none is fitted here. The low-pressure (L) type suits reduced outlet settings - confirm its adjustment range with us. Flow is published as curves, not one rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-15 filter regulator on its own.
AirTAC publishes flow for the G series as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure, set pressure and air demand and we will confirm the sizing from the datasheet on request.
It is the regulator version intended for reduced outlet settings rather than the standard type. Its exact low-pressure adjustment range is a datasheet figure, so confirm it with us on request; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.